Suggested Next Steps; Troubleshooting - Cisco WAP125 Quick Start Manual

Safari browser, you can find the Cisco WAP125 on your local network
without knowing its IP address.
You can download the complete Bonjour for Microsoft Internet
Explorer browser from Apple's website by visiting:
http://www.apple.com/bonjour/
c. Locate the IP address assigned by your DHCP server by accessing your
router or DHCP server. See your DHCP server instructions for more
information.
Launch a web browser, such as Microsoft Internet Explorer.
S 3
TEP
In the address bar, enter the default DHCP address and press the Enter key.
S 4
TEP
Enter the default user name of cisco and password of cisco in the Username
S 5
TEP
and Password fields.
Click Log In. The Wireless Access Point Setup Wizard appears.
S 6
TEP
Follow the Setup Wizard instructions to finish the WAP device installation.
S 7
TEP
We strongly recommend that you use the Setup Wizard for the first
installation. For more advanced configurations, see the
Administration Guide. A link to the Administration Guide is found in
to Go From
Congratulations, you can now start using your Cisco WAP125.
7

Suggested Next Steps

In case of an error while installing, try the troubleshooting procedures described in
this section.

Troubleshooting

If you cannot display the configuration utility, you can test the ability of the
computer to communicate with the Cisco WAP125 by using ping. To use ping on a
computer running Windows:
Verify that the Cisco WAP125 is powered on and the lights indicate the
S 1
TEP
appropriate links.
Locate the Cisco WAP125's IP address. While there are different
S 2
TEP
ways to locate the IP address, this procedure uses Cisco FindIT.
6
Here.
Cisco WAP125 Quick Start Guide
Where