Chapter 3
Installing Modules and Cables in the Chassis
Figure 3-4
A 9
K -
M P
A -
2 X
1 0
G E
Table 3-2
Table 3-3
LED Label
A/L
STATUS
Installing and Removing Modular Port Adapters
These sections describe how to install or remove modular port adapters (MPAs) on the
Cisco ASR 9001 Router.
•
•
•
•
OL-26701-02
2-Port 10 Gigabit Ethernet Modular Port Adapter
describes the 2-Port 10 Gigabit Ethernet modular port adapter LEDs.
2-Port 10 Gigabit Ethernet Modular Port Adapter LEDs
Color
Off
Green
Amber
Off
Green
Amber
Handling Modular Port Adapters (MPAs), page 3-6
Online Insertion and Removal, page 3-6
Modular Port Adapter (MPA) Installation and Removal, page 3-7
Optical Device Installation and Removal, page 3-8
E
G
0
1
X
- 2
A
P
M
-
K
9
A
State
Meaning
Off
Port is not enabled.
On
Port is enabled and the link is up. The MPA A/L LED will
blink green when there is traffic activity.
On
Port is enabled and the link is down.
Off
Modular port adapter power is off.
On
Modular port adapter is ready and operational.
On
Modular port adapter power is on and good, and the
modular port adapter is being configured.
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
Installing and Removing Modular Port Adapters
3-5