Chicago Electric MIG 170 Owner's Manual & Safety Instructions page 20

DANGER! TO PREVENT DEATH
FROM ASPHYXIATION:
Do not open gas without proper ventilation. Fix gas
leaks immediately.
Shielding gas can displace air and cause rapid loss of
consciousness and death.
Shielding gas without carbon dioxide can be even
more hazardous,
because asphyxiation can start
without feeling shortness of breath.
5. Gas shielded, solid-core wire only:
Open gas tank valve and adjust regulator/
flowmeter to flow rate indicated on chart.
6. Flip the Power Switch to the OFF position, then plug
the Welder into a dedicated, 240 V~ receptacle that
matches the plug.
The circuit must be equipped with delayed
action type circuit breaker or fuses.
7. Hold the Torch, without touching the Trigger, with the
wire and tip clearly out of the way of any grounded
objects.
Then, turn the Power Switch ON.
Page 20
WIRE FEED WELDER
Wire
Capacity 22 Ga. – 1/4" Steel Plate
Material
Types
For technical questions, please call 1-800-444-3353.
I
O
MIG 170
ITEM 68885
.023"-.035"
(Tip and roller change required)
Mild Steel and Stainless Steel
(Not for welding Aluminum.)
WIRE FEED SPEED
240V~
20A
HOLD
TORCH
CLEAR
I
O
MIG 170
WIRE FEED WELDER
ITEM 68885
.023"-.035"
Wire
(Tip and roller change required)
Capacity 22 Ga. – 1/4" Steel Plate
Material Mild Steel and Stainless Steel
Types (Not for welding Aluminum.)
WIRE FEED SPEED
240V~
20A
SKU 68885