Download
Share
Print this page
Chicago Electric 61433 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Chicago Electric Manuals
  4. Welding System
  5. 61433
  6. Owner's manual & safety instructions
Chicago Electric 61433 Owner's Manual & Safety Instructions

Chicago Electric 61433 Owner's Manual & Safety Instructions

Dent repair stud welder
Hide thumbs

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2013 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19c
61433

Advertisement

loading

Related Manuals for Chicago Electric 61433

Summary of Contents for Chicago Electric 61433

  • Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Visit our website at: http://www.harborfreight.com 61433 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged.

  • Page 2: Table Of Contents

    A moment of inattention while operating welders may result in serious personal injury. Page 2 For technical questions, please call 1-888-866-5797. Item 61433...
  • Page 3 3. Keep clothing free of grease, oil, solvents, or any flammable substances. Wear dry, insulating gloves and protective clothing. Item 61433 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 Clean and purge containers before applying heat. Vent closed containers, including castings, before preheating, welding, or cutting. Page 4 For technical questions, please call 1-888-866-5797. Item 61433...
  • Page 5 2. Have your Welder serviced by a qualified maintenance, or cleaning procedures. repair person using only identical replacement parts. This will ensure that the safety of the Welder is maintained. SAVE THESE INSTRUCTIONS. Item 61433 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 16 gauge cord. by a qualified electrician before using it. 8. Protect the extension cords from sharp objects, excessive heat, and damp or wet areas. Page 6 For technical questions, please call 1-888-866-5797. Item 61433...
  • Page 7 Symbology Housing Ground Point Open Circuit Voltage Kilovolt Amperes Volts (Volts / 1000 * Amperes) Alternating Current American Wire Gauge Amperes Item 61433 For technical questions, please call 1-888-866-5797. Page 7...

  • Page 8: Specifications

    120 VAC, 60 Hz Circuit Requirement 20 A (dedicated) Weldable Materials Sheet steel Stud Weld Time 0.5 to 1.0 seconds Duty Cycle Tool can weld one stud each 8 minute time interval Page 8 For technical questions, please call 1-888-866-5797. Item 61433...

  • Page 9: Setup

    Components and Controls Trigger Ground Sleeve 2 mm Stud Electrode Circuit Breaker Reset Button Slide Hammer 2 mm Studs 3 mm Studs Additional 3 mm Stud Electrode Tip Head Roller Item 61433 For technical questions, please call 1-888-866-5797. Page 9...

  • Page 10: Operation

    Circuit Breaker Reset Button. a circuit with a minimum 20 amp capacity. 6. Pull the Stud Welder directly back, leaving the welded stud in place with the tip of the stud exposed. Page 10 For technical questions, please call 1-888-866-5797. Item 61433...
  • Page 11 Handle against the Back Handle (away from the workpiece) until the dent has popped out. CAUTION! Keep hands clear of pinch points. Stud Hammer Head Center Handle Back Handle Workpiece Head Roller Item 61433 For technical questions, please call 1-888-866-5797. Page 11...

  • Page 12: Maintenance

    Continues to Trip 2. Electrical fault in Welder. 2. Have qualified technician service Welder. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 12 For technical questions, please call 1-888-866-5797. Item 61433...
  • Page 13 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 61433 For technical questions, please call 1-888-866-5797. Page 13...

  • Page 14: Parts List And Diagram

    12a 3 mm Stud Electrode Tip (not shown) Screw 10-32 x 1-1/2" Cap Screw 1/4 x 20 x 5/8" Nut 1/4 x 20 FRP Insulator Flat Washer 5/16 Circuit Breaker Nut 5/16 Page 14 For technical questions, please call 1-888-866-5797. Item 61433...
  • Page 15 Assembly Diagram Item 61433 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.