Three Ways To Connect To A Wi-Fi Network - Canon WFT-E6 Manual

Three Ways to Connect to a Wi-Fi Network

Before using the Wi-Fi Remote application to remotely control the camcorder, you need to
wirelessly connect the camcorder (with the transmitter attached) to a Wi-Fi network via an
access point (wireless router). There are three ways to do so, and the method you use will
depend on the specifications of the access point you want to use.
Note that using an unprotected Wi-Fi network can expose your data to monitoring by
unauthorized third parties. Be aware of the risks involved.
[WPS: Button]
[WPS: PIN Code]
Even if your wireless router does not have a dedicated WPS button, it may support WPS using
a PIN code instead. For setup using a PIN code, you will need to know in advance how to
activate the wireless router's WPS function. For details refer to the instruction manual of your
wireless router.
[Connection Wizard]
If your wireless router does not support Wi-Fi Protected Setup (WPS) or you wish to manually
configure settings, you can use the Connection Wizard to manually set the various settings.
This requires more advanced knowledge of Wi-Fi and network settings.
Depending on the country/region of use, some restrictions on outdoor use or Ad Hoc mode use may
apply when operating the IEEE802.11a/n wireless standard in the 5 GHz band. For details see Areas
of Use and Restrictions (separate leaflet supplied with the transmitter).
8
If your wireless router supports Wi-Fi Protected Setup (WPS), setup will
be easy and require minimal configuring and no passwords. To check if
your wireless router has a WPS button and for details about how to
activate the Wi-Fi protected setup, refer to the instruction manual of your
wireless router.