Changing Settings - Canon WFT-E6 Manual

Wireless file transmitter

Hide thumbs Also See for WFT-E6:

Table of Contents

Changing Settings

You can edit the Wi-Fi network settings even after the initial setup. Changing settings manually

requires more advanced knowledge of Wi-Fi and network settings. The Wi-Fi connection will be

disabled while you change these settings. After completing the changes, the camcorder will

connect to the Wi-Fi network using the new configuration.

Changing Wi-Fi Settings

Changing TCP/IP Settings

Select the network configuration profile

you want to change (A 20).

Open the Wi-Fi [Edit] submenu.

[w Other Functions] > [Wi-Fi Remote] > [Edit]

Continue with one of the following

procedures depending on the settings

you wish to change.

Select [LAN Setup] and then press SET.

The wireless connection mode selection screen

appears. Continue the procedure as described in

Entering the Wi-Fi Network's Details Manually

(A 13, from step 2).

Select [TCP/IP] and then press SET.

The TCP/IP settings screen appears.

Select [IP Address Assignment] and

then press SET.

Select [Automatic] or [Manual] and then

press SET.

If you selected [Automatic], IP settings will be

assigned automatically and no further settings are

necessary.

Select [L], press SET and then close the menu.

Table of Contents

Wft-e6a