Erasing Messages; Leavinga Memo - GE 2-9795 User Manual

ERASING MESSAGES
Press and release the ERASE button to erase the message currently
playing. Holding the ERASE button enables you to erase all messages in a
mailbox.
f
f NOTE: Messages erased with either of the preceding methods cannot |
_be restored.
)
TOTAL MESSAGE ERASE
1. Make sure the unit is not playing messages.
2. Press the MAILBOXES button to select the mailbox
that you want to erase.
3. Press and hold down the ERASE button. When the unit beeps, the
messages are erased.
4. Repeat the processfor each mailbox that you want to erase.
LEAVING A MEMO
Use the Memo feature to leave a message directly into one of the four
mailboxes.
1. Press MAILBOXES button to select desired mailbox.
2, Press and hold the MEMO button.
3. Begin talking after you hear the beep.
4. Release the MEMO button when you finish,
COI v-Ze SATION RECORD
You cannot record a conversation when using the speakerphone; you must
use the handset. To record a conversation, just press the handset ANSWERER
button while you're talking. Press the handset ANSWERER button again to
stop recording during a conversation. Hanging up will also stop recording.
=
I WARNIN_._' It may be illeg,l in some areaL5 to record a conver,adon without !
t
proper notification and consent.
J
14