Fisher & Paykel DishDrawer DD603 User Manual page 20

PROBLEM SOLVER
If the DishDrawer_'does not appear to be operating properly, check this chart below and correct where possible.
_USS:BLE CAU,SE
ca Power supply not connected.
ca The drawer not closed properly.
ca Lock feature is on.
ca START/PAUSE button not pressed.
ca Connect the power supply.
© Ensure drawer is firmly closed.
ca Turn Lock off. Hold down LOCK button until
the "lock" symbol (Prefinished) or _reen light
(Integrated) disappears.
ca Press START/PAUSE button.
ca Insufficient rinse a_ent.
Rinse a_ent settin_ too low.
DishDrawer ®overloaded or
incorrectly loaded.
ca Straighten the drain hose(s).
ca Clean the filter plate/drain filter Unblock the
drain hosefs).
Refer to User Maintenance section.
© Check if there is enough rinse a_ent in dispenser
ca Increase the rinse a_ent setting.
ca Refer to section on Loading.
ca Refer to Wash Programs section for suitable
wash program, or the soils were too heavily
baked on & may need soaking.
ca Ensure no items are blockin_ the spray arm path.
ca Refer to the section on Loading.
ca Refer to User Maintenance section.
ca Deter_ent must be placed in the large
compartment.
ca Scrape all food scraps off dinnerware.
ca Use recommended brands of dishwasher
deter_ent.
ca Refer to Wash Programs section or the
deter_ent manufacturer's instruction.
cn Clean the spray arm.
ca Clean filter plate and drain filter
ca Refer to Accessories section for correct
installation.
ca We recommend the installation of a water
softener Use deter_ents with a high phosphate
content and increase the dosage.