Selecting Photo Size And Quality - Canon LEGRIA HFR16 Instruction Manual

IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
• When recording photos on an Eye-Fi card, photos will be uploaded
automatically if you are within the range of a configured network. Make
sure Eye-Fi cards are approved in the country or region of use.
Using an Eye-Fi card
See also
NOTES
• You cannot take photos when
Also, you cannot take photos when digital zoom is activated (light blue
and dark blue area on the zoom bar).
• When
the camcorder will automatically adjust the shutter speed.

Selecting Photo Size and Quality

Photos are recorded as JPG files. As a general rule, select a larger
photo size for higher quality. Select the [
with an aspect ratio of 16:9.
Operating modes:
Options
Photo size options and the approximate number of photos that can be
recorded on memory cards of various sizes are given in the following
table.
FUNC.
[
Desired photo quality*
* Press to move back and forth between size and quality selection. The number
displayed on the right corner indicates the approximate number of photos that can
be recorded with the current quality/size setting.
80
Photos
[Flicker Reduction] is set to [
1600x1200]
( 121).
[Frame Rate] is set to [
1920x1080] size for photos
Desired photo size*
FUNC.
50 Hz] or [ 60 Hz],
PF25].