Table of Contents
Advertisement
• If the degree of camcorder shake is too high, the image stabilizer may
not be able to fully compensate. The image stabilizer may not be able to
successfully eliminate all blur if the camcorder or the subject is moving
too much.
• The image stabilizer may not work well on subjects with low contrast,
with a recurring, repetitive pattern or without vertical lines.
• When [Image Stabilizer] is set to [
movement does not appear natural, select [
[Flicker Reduction]:
under fluorescent lights, change the setting to reduce the effect.
• Flicker reduction can be activated only when the recording program is
set to [
Programmed AE.]
[Auto Slow Shutter]:
speeds to obtain brighter recordings in places with insufficient lighting.
• Minimum shutter speed used: 1/25; 1/12 when the frame rate is set to
[
PF25].
• The auto slow shutter can only be activated when the recording pro-
gram is set to [
if you set the camcorder to
• If a trailing afterimage appears, set the slow shutter to [
• If
(camcorder shake warning) appears, we recommend stabilizing
the camcorder, for example, by mounting it on a tripod.
[Auto Backlight Correction]:
source behind them, you can have the camcorder automatically correct
for the backlight.
• In
mode, auto backlight correction will automatically be set to
[
On].
Camera Setup 3 (
Menu item
[Self Timer]
[Focus Assistance]
[Onscreen Markers]
[Audio Level Indicator]
[Wind Screen]
If the screen starts to flicker when recording movies
The camcorder automatically uses slow shutter
Programmed AE], but the setting will not change even
When shooting subjects with a strong light
Mode)
[
On
], [
[
On], [
[
Off], [
[
Grid (White)], [
[
On], [
[
Automatic], [
Dynamic], if the background's
mode.
Setting options
Off]
Off]
Level (White)], [
Grid (Gray)]
Off]
Off
]
Additional Information
Standard] or [
Off].
Level (Gray)],
Off].
56
–
–
65
–
127
Hide quick links:
Advertisement
Table of Contents
