Copying Scenes To A Memory Card - Canon LEGRIA HFR16 Instruction Manual

- Scenes that were edited using the software on the supplied software
ImageMixer 3 SE and were then written back to the memory.
• When the source scene is itself a video snapshot scene, you may not
be able to capture a video snapshot scene depending on the length of
the source scene and the length currently selected for video snapshot
scenes.
• When you start capturing a video snapshot scene less than 1 second
from the end of the scene, the video snapshot scene will be captured
starting from the beginning of the following scene.
• During the playback of video snapshot scenes captured from a previ-
ously recorded movie, you may notice some anomalies in the picture/
sound at the point where the playback switches to a new scene.
/ /
You can copy original movies or the entire playlist only from the built-in
memory to the corresponding location on the memory card. See
Photos to a Memory Card
memory card.
Operating modes:
Copying Original Movies
1 Open the index screen of original movies recorded in the built-in
memory.
• Select the
• You can press
snapshot scenes.
2 Select ( ,
or a scene recorded on the date you want to copy.
This step is not necessary to copy all scenes or previously selected
scenes.
3 Copy the scene(s).
FUNC.
[OK]
* Press to interrupt the operation while it is in progress.
76
Video

Copying Scenes to a Memory Card

( 90) for details on copying photos to the
tab under the
VIDEO SNAP
) the scene you want to copy to the memory card,
[ Copy (
FUNC.
icon.
to open the index screen for video
)] Desired option
Copying
[Yes]*