Shelves - AMERICANA 16 Owner's Manual & Installation Instructions

Care and cleaning of the refrigerator.
Behind the Refrigerator
Be caretul when moving tile refl'igerator
awav from tile wall. All tvl)es of floor
coverings can be damaged, i)articularly
cushioned coverings and those with
embossed s/IFJ[_l c es.
Turn tile leveling legs at each fl'ont corner
of the refl_igerator co/mterclockwise tmtil
the rolle_ support the refl'igeratm: Pull the
refrigerator straight out
and
I'ettlI'n it to
positi(m by pushing it straight in. Moving
the refl-igerator in a side direction may
result in damage to the floor covering or
refrigeratm:
When pushing the refrigerator back, make sure
you don't rot over the power cord or icemaker
supply line _onsome models).
_Mter rolling tile refrigerator back into
place, turn the legs clockwise until the
legs again bear the weight of the
refl'igerator.
Light Bulb Replacement
To replace a burned-out bulb, unplug
tile refl'igerator fl'om its electrical outlet,
unscrew tile bulb when cool and replace
it with an appliance bulb of tile same or
lower wattage.
Turning the control to the0 position doesnot
removepower to thefight circuit.
Preparing for Vacation
For long
Va('ations oi" absences, i'eillove
fl_od and m_plug tile refl'igeratm: Move
tile temperatm'e control dial to tile 0
position, and clean the interior with a
baking soda solution of one tablespoon
(l 5 ml) of baking soda to one qtlart
(l liter) of water. I,eave the doors open.
Set tile icemaker power switch to tile
0 (Off) position or move tile feeler arm to
the STOP (up) position (depending on
model) and shut off tile water
supply
to
the refl'igera tot.
If tile temperature can drop below
fl'eezing, have a qualified servicer drain
tile water supply s):stem (on some models)
to prevent serious property damage due
to flooding.
Preparing to Move
Secure all loose items such as grille,
shelves and drawers by taping them
secm'elv in place to prevent damage.
Be surethe refrigeratorstays in an upright
positionduringmoving.
10