Agilent Technologies 3000 Series User's And Service Manual page 107

In the Save menu:
• To select the folder in which you want to save the file, press Location
• To highlight a character in the file name, press Enter to rotate through
• To add a character to the file name, press Enter until there is a
• To change the value of the highlighted character in a file name, press
• To delete the highlighted character from the file name, press Delete
• Once you have entered the name, press Save to save the file.
• If the file name already exists, the Over Write menu lets you confirm or
Connect the USB device to a computer to perform other file and folder
operations (for example, creating folders, deleting files, etc.).
Agilent 3000 Series Oscilloscopes User's Guide
and turn the Entry knob; when you have selected the desired folder,
press Location again.
the characters from left to right.
highlighted box at the end of the file name; then, turn the Entry knob to
select the new character.
File Name and turn the Entry knob; when the desired character has been
selected, press Enter.
Character.
cancel the save.
Saving, Recalling, and Printing Data 5
107