Battery Installation; Battery Notice - VTech Touch & Swipe Baby Phone User Manual

INSTRUCTIONS

BATTeRY INSTALLATIoN

1. Make sure the unit is turned oFF.
2. Locate the battery cover on the back
of the unit. use a screwdriver to loosen
the screw.
3. Install 2 new 'AAA' (AM-4/Lr03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended
for maximum performance.)
4. replace the battery cover and tighten
the screw to secure the battery cover.

BATTeRY NoTICe

• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
4