Control Exercised From The Multi Hybrid Control Panel Aw-Rp555 - Panasonic AW-HE120KE Operating Instructions Manual

Basic operations
 Control exercised from the Multi Hybrid Control Panel AW-RP555 
Each time the [GAIN] button is pressed,
the setting is switched in the sequence
of GAIN AUTO0dBL (9dB)H
(18dB), and the mode is displayed by the
LEDs as shown below.
[ON: LED lights; OFF: LED off]
GAIN MANU L
button LED
AUTO ON OFF
0dB OFF OFF
LOW OFF ON
HIGH OFF OFF
Others OFF ON
Each time the [MODE] button is pressed,
the setting is switched between CAM
and BAR.
The [MODE] button lights up at the BAR
setting.
For selecting the cameras
to be operated.
For switching the Iris mode. *3
Shutter mode selection
Each time this button is pressed, one of the shutter
modes set by the controller or "shutter OFF" is selected.
The [SHUTTER] button lights up in all modes except
shutter OFF.
The shutter mode settings established by the [PRESET]
buttons are as follows.
MODE PRESET No.
1/100** 1
PRESET1
1/120** 2
1/250 PRESET2
SYNCHRO-
1/500 PRESET3
1/1000 PRESET4
1/2000 PRESET5
1/4000 PRESET6
**1: "1/100" when 59.94 Hz is selected as the frequency setting
of the AW-HE120.
**2: "1/120" when 50 Hz is selected as the frequency setting of
the AW-HE120.
*1: The lamp of the AWC or ABC switch flashes while
automatic white balance or automatic black balance
is being executed, respectively. When AWB or ABB
is completed successfully, the corresponding lamp
goes off; when it is not completed successfully, it
lights up.
*2: The switch lights without AWB being executed when
the white balance mode of the main unit is ATW,
3200K, or 5600K, or when the Color Bar is being
displayed.
*3: When AUTO setting is established for the iris mode,
this control can be used to adjust Picture Level;
when MANU setting is established, it can be used to
adjust the iris.
34
(continued)
For executing AWB. *1, *2
MANU H
LED
OFF
OFF
OFF
ON
ON
MODE PRESET No.
1/10000 PRESET7
PRESET8
SCAN
ELC PRESET9
OFF PRESET10
For executing ABB. *1, *4
For switching White Balance Mode
A, B or ATW.
*4: The switch lights without ABB being executed when
the Color Bar is being displayed.
*5: Flashing stops when communication is
disconnected because the OPERATE switch has
been turned OFF, CAMERA SELECT has been
switched, the communication cable has been
disconnected, etc.
*6: The ND button cannot be used.
Perform the operations using the camera menu.
For switching the SCENE file
(Scene1 to Scene4).
For operating the camera
menus.
MENU: For displaying and
exitingthe camera
menus.
ITEM: For entering the menu
items and settings.
YES, NO:
For moving the cursor or
changing the settings.
The lamp of this button
flashes when an alarm (Fan
Error) has been received from
the camera. *5
*6
Each time the [EXT(AF)]
button is pressed, the focus
setting is switched between
auto focus and manual focus.
When auto focus is selected,
the [EXT(AF)] button lights.
When the focus setting
is switched between auto
focusing and manual focusing
by the camera menu or by the
other controller, the resulting
status (lamp on or off) will not
be reflected in the button.