Belkin N1 vision User Manual page 90

Manually Configuring Network Settings
Manually Configuring Network Settings in Windows 2000, NT
1.
Click "start", "settings", then "Control Panel" .
2.
double-click on the "Network and dial-up connections" icon
(Windows 2000) or the "Network" icon (Windows XP) .
3.
right-click on the "local Area Connection" associated with
your network adapter and select "Properties" from the
drop-down menu .
4.
in the "local Area Connection Properties" window, click "internet
Protocol (TCP/IP)" and click the "Properties" button. The
following screen will appear:
(1)
(2)
(3)
5.
if "use the following iP address"
will need to be set up for a static iP connection type . Write the
address information the table below . You will need to enter this
information into the router .
6.
if not already selected, select "obtain an iP address
automatically"
(3)
. Click "oK" .
Your network settings are now configured for use with the Router.
(1)
and "obtain dNs server address automatically"
(2)
is selected, your router
90 90
, or XP
®