Belkin N1 vision User Manual page 75

Using the Web-Based Advanced User Interface
Restoring Factory Default Settings
using this option will restore all of the settings in the router to the
factory (default) settings . it is recommended that you back up your
settings before you restore all of the defaults .
1.
Click the "restore
defaults" button .
2.
the following message
will appear . Click "oK" .
3.
An 80-second countdown will appear on the screen . When the
countdown reaches zero, the router's defaults will be restored .
the router's home page should appear automatically . if it does
not, type in the Router's address (default = 192.168.2.1) into the
navigation bar of your browser .
75