Belkin N1 vision User Manual page 68

Using the Web-Based Advanced User Interface
Setting Client IP Filters
the router can be configured to restrict access to the internet,
e-mail, or other network services at specific days and times .
restriction can be set for a single computer, a range of computers,
or multiple computers .
to restrict internet access to a single computer for example, enter
the iP address of the computer you wish to restrict access to in the
(1)
iP fields . Next, enter "80" in both the port fields
(3)
. select "Block"
all of the time . select the day to start on top
(6)
top , the day to end on the bottom
the bottom . select "enable"
at the iP address you specified will now be blocked from internet
access at the times you specified . Note: Be sure you have selected the
correct time zone under "utilities> system settings> time Zone" .
(1)
(4)
. You can also select "Always" to block access
(9)
. Click "Apply Changes" . the computer
(2)
(3)
(2)
. select "Both"
(5)
, the time to start on
(7)
, and the time to stop
(5)
(4) (7)
67
(8)
on
(6)
(8) (9)