Silencing Low Battery Warning Tones At The Keypad; Routine Care - Honeywell Ademco VISTA-50PUL User Manual

Silencing Low Battery Warning Tones at the Keypad

The keypad's warning tones can be silenced by performing an OFF sequence
(code plus OFF key), but the Keypad's low battery message display will
remain on as a reminder that you have a low battery condition in one or more
of your sensors. When you replace the weak battery with a fresh one, the
sensor will send a "good battery" signal to the control as soon as the sensor is
activated (opening/closing of door, window, etc.), causing the low battery
display to turn off. If the sensor is not activated, the display will
automatically clear within approximately 1 hour.

Routine Care

•
Treat the components of your security system as you would any other
electrical equipment. Do not slam sensor-protected doors or windows.
•
Keep dust from accumulating on the keypad and all protective sensors,
particularly on motion sensors and smoke detectors.
•
The keypad and sensors should be cleaned carefully with a dry soft cloth.
Do not spray water or any other fluid on the units.
Maintaining Your System (cont'd)
– 57 –