Arming Perimeter Only; Using The 3 Stay Key - Honeywell Ademco VISTA-50PUL User Manual

Using the 3 STAY key

Use this key when you are staying home, but might expect someone to use
the entrance door later.
When armed in STAY mode, the system will sound an alarm if a protected
door or window is opened, but you may otherwise move freely throughout the
premises. Late arrivals can enter through the entrance door without causing
an alarm, but they must disarm the system within the entry delay period or
an alarm will occur.
Check with your installer for a list of the zones that are bypassed during each
STAY mode.
Close all perimeter windows and doors before arming (see
CHECKING FOR OPEN ZONES section)
1. Enter your security code and press
2.
ARMED ***STAY***
ZONE BYPASSED

Arming Perimeter Only

STAY
3
The keypad beeps three times, displays the
armed message.
Note: "ZONE BYPASSED" in this display
simply indicates that some zones of protection
are not armed when using STAY mode.
(With Entry Delay ON)
–29 –