Table of Contents
Advertisement
Installation and Operation Guide
Change the Application Setting — Alarm - Motion Detection.
Please follow the steps below to enable changes in the motion detection function of the alarm
through the network as necessary.
Set the motion detection:
1.
Click on the Motion Detection button on the left side of the Alarm to enter the "Alarm –
Motion Detection" page.
2.
Click and drag the mouse across a targeted zone to draw a red rectangle on the image
(coordinates provided below).
NOTE: You can set more than one targeted zone depending on your requirement.
3.
Enables / disables the motion detection function.
4.
Set up the signal level.
5.
Click on the Submit button to submit the new setting of the recording.
6.
Click on the Home button to return to the home page.
Description of function keys:
The targeted zone:
Detection Range:
Save:
Motion Detection:
Sensitivity Level:
Click and drag the mouse across the targeted zone to draw a red
rectangle on the image.
The red rectangle's coordinates.
Click to save the motion detection range.
This option enables / disables the motion detection function.
You can select any one of the given options for the setup signal
level or just type in the value of Customized Threshold.
59
Advertisement
Table of Contents
