Table of Contents
Advertisement
Description of function keys:
IP Address:
Netmask:
Default Gateway:
Primary Nameserver: Enter the 4-byte DNS Server Address in the blank spaces provided
HTTP Port:
Submit:
34
Enter the 4-byte IP Address in the appropriate blank space (the
value in each box may be anywhere between 0 and 255). Every IP
camera has to own an IP address to be identified on the network.
Enter the 4-byte Subnet Mask in the required blank spaces (usually
any numbers between 0 and 255). It is used to identify the subnet
where the IP camera is sited.
Enter the 4-byte Gateway in the relevant blank spaces (each unit
value must be between 0 and 255).
(each value unit must be between 0 and 255). The DNS Server is in
charge of translating the Domain Name into the IP Address.
Indicates the specific HTTP Port Number. The default is 80.
Click to submit the new network setting to the IP camera.
Installation and Operation Guide
Advertisement
Table of Contents
