Setting The Device - Samsung SDE-500X User Manual

SETTING THE DEVICE

You can configure the settings of: Camera, Storage Device, Remote Device and Monitor.
Camera
Setting the Camera
You can set Video, Audio, Channel Name and Dwell Time of a Camera.
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control or front
panel.
2. Use the left/right button (◄ ►) to select <Device>.
Device setting menu is selected.
3. Use the up/down buttons ( ) to move to <Camera>,
and press [ENTER] button.
4. Select <Camera>.
You will see a window where you can configure the
camera settings including Video, Audio, Channel Name,
SEQ-Dwell Time and Privacy Region.
5. Use direction buttons ( ◄ ►) to move to a desired
item, and set the value.
• Video
- <ON/OFF> : You can turn ON/OFF the selected channel's
camera.
- <Covert1> : Shows information other than the video of
the selected channel.

For privacy protection, it does not display the video while the recording continues.
- <Covert2> : Shows nothing but an empty screen while the recording continues.
• Audio
- If set to <ON>, you can turn the audio of the channel ON on the Live screen.
- If set to <OFF>, the channel's audio is off on the Live screen and not recorded.
• CH Name : Up to 15 characters including blanks are allowed.

Refer to "Using Virtual Keyboard". (Page 50)
• SEQ-Dwell Time : You can set the dwell time between channels for the Live screen.

If set to <OFF>, the channel is not listed in the Auto Sequence mode.
Logout
Device
Camera
Storage Device
Remote Device
Monitor
Camera
Camera
Video  Audio 
CH CH Name
 
1 ON OFF CAM 01
 
2 ON OFF CAM 02
 
3 ON OFF CAM 03
 
4 ON OFF CAM 04
 
5 ON OFF CAM 05
 
6 ON OFF CAM 06
 
7 ON OFF CAM 07
 
8 ON OFF CAM 08
Previous/Next Page
Screen Setup Privacy Region
OK Cancel
English _59
Return
SEQ-Dwell Time 

5 sec

5 sec

5 sec

5 sec

5 sec

5 sec

5 sec

5 sec