4. Connect the E-IDE & power cables.
Sub-power cable for SATA Converter board
Connect to the power cable
5. In case of installing two Hard Disk Drives.
Check the "MASTER" or "SLAVE" on the SATA converter board.
Connect to the power(SMPS) using power cable. (1st HDD - the main power cable, 2nd
HDD - the sub power cable)
When you use two HDDs, HDDs should be same model and have same interface.
Connect with E-IDE HDD cable and power cable.
a. Direction of the SATA Converter board
b. Direction of the main power
Connect to the E-IDE HDD cable
Digital Video Recorder
80
User's Manual