Enabling The Radios; Accessing Radio Configuration Utilities; Connecting And Synchronizing The Terminal And Workstation; Capabilities - Honeywell Dolphin 6000 User Manual

Enabling the Radios

1. Tap > Settings > Connections > Dolphin Wireless Manager.
2. Tap anywhere inside the rectangle or the OFF button inside the rectangle.
3. The radio begins activating.
4. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON.
Note: If applicable, information about the radio appears in the rectangle.

Accessing Radio Configuration Utilities

Each radio has its own configuration utility that you can access by tapping Menu on the command bar.
Radio Type
802.11a/b/g
Bluetooth
GSM/GPRS/EDGE

Connecting and Synchronizing the Terminal and Workstation

Note: If the workstation is running Windows Vista or Windows 7, you will need to use Windows Mobile Device Center to
synchronize data between your terminal and workstation.
To synchronize data between the terminal and the workstation, ActiveSync (version 4.5 or higher) or Windows Mobile Device
Center must be installed and configured for the appropriate communication type on the host workstation (Windows-based PC)
and the Dolphin terminal. Dolphin terminals ship with ActiveSync already installed. Therefore, if ActiveSync or Windows Mobile
Device Center is already installed on the host workstation, you just need to connect the Dolphin terminal to the host workstation
(via Dolphin peripheral) to initiate communication.
If ActiveSync (4.5 or higher) or Windows Mobile Device Center is not installed on the host workstation, you can download and
install the most current version of the software from the
Note: Note: ActiveSync on your Dolphin terminal works with Windows Mobile Device Center on host workstations running
Windows Vista or Windows 7 and with ActiveSync on host workstations running Windows XP. For detailed information on
ActiveSync and WMDC visit the
If ActiveSync 4.5 or higher/Windows Mobile Device Center is not installed on the host workstation, download the latest version
of the program from www.microsoft.com.
When communicating via ActiveSync or Windows Mobile Device Center, your terminal is designed to be connected to the
host workstation with a communication peripheral sold/manufactured by Honeywell, such as the charge/communication
cable. Use of any peripheral not sold/manufactured by Honeywell may cause damage not covered by the warranty.
Note: If communication in ActiveSync or Windows Mobile Device Center fails, remove the USB Communication Cable and
connect the USB Communication Cable to the host workstation again to initiate the process.

Capabilities

The following is a list of the procedures you can do with ActiveSync or Windows Mobile Device Center:
• Back up and restore the terminal data
• Copy (rather than synchronize) files between the terminal and workstation.
• Control when synchronization occurs by selecting a synchronization mode. For example, you can synchronize continually
while connected to your workstation or only when you choose the synchronize command.
• Select which information types are synchronized, controlling how much data is synchronized. For example, you can
choose how many weeks of past appointments you want synchronized.
8 - 4
Menu Option
Tap WLAN Settings and the Honeywell WLAN Security Supplicant opens.
The Honeywell WLAN Secure Wireless Client (SWC) User's Guide is available for download
from the Dolphin 6000 product page at www.honeywellaidc.com.
Tap Bluetooth Settings and the Bluetooth Settings open.
For details, see Working with Bluetooth Radio
Tap Phone Settings and the Phone opens.
For details, see Working with GSM/GPRS/EDGE
Microsoft Web site
Microsoft Windows Phone Web
on page 10-1.
on page 9-1.
(http://go.microsoft.com/fwlink/?LinkId=147001).
site.