Standard Or Mini Pendant Mount - D-Link DCS-6915 User Manual

20x full hd high speed dome network camera

Hide thumbs Also See for DCS-6915:

Table of Contents

Section 2: Assembly and Installation

Follow the steps below to mount the camera enclosure with the pendant mount.

1. Make a cable entry hole on the wall to recess the cables. Alternatively, cables

can be threaded through the cable entry hole on the mounting plate.

2. To prevent insects from entering the pendant mount, you may block the cable

entry hole with the supplied sponge in two different ways.

3. Thread the cables through the pendant mount and affix the pendant mount on

the wall with screws and screw anchors (not supplied).

4. Attach the waterproof collar to the pendant mount.

5. Thread the cables through the cap and affix it to the pendant mount with the

supplied screws and washers.

6. Connect the cables to the camera enclosure. Attach the camera enclosure to the

mount and affix it with the supplied bolt.

Note: After threading the cables, please block the cable entry hole with the supplied

sponges to prevent insects from entering the tube.

D-Link DCS-6915 User Manual

Standard or Mini Pendant Mount

Sponge

Table of Contents