Event Management; Motion Detection - D-Link DCS-6915 User Manual

Section 3: Advanced Configuration
Motion can be detected by measuring change in speed or vector of an object or objects in the
field of view.
Enable Motion Detection: Select this option to turn on the motion detection feature.
Sensitivity: Set the measurable difference between two sequential images that would indicate
motion.
Detection Level: Set the amount of motion in the window being monitored that is required to
trigger a motion detected alert. If this is set to 100, this means that motion must be detected
within the whole window to trigger a snapshot.
Note: Setting a higher sensitivity and a lower detection level will make motion more easily
detected.
Add: Click to add a new window. A maximum of three motion windows can be opened
simultaneously. Use your mouse to drag the window frame to resize or the title bar to move.
Clicking on the 'x' at the upper right corner of the window will close the window.
Save: Save the configured settings.
To enable motion detection, follow the steps below:
1. Click Add to add a new motion detection window.
2. Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving
the Sensitivity and Percentage slide bar.
3. Click Save to apply the changes.
4. Select Enable motion detection to activate motion detection.
D-Link DCS-6915 User Manual

Event Management

Motion Detection

45