Mini Pendant Mount - D-Link DCS-6815 User Manual

Section 2 - Installation
Follow the steps below to mount the camera enclosure with the mini
pendant mount.
1. Make a cable entry hole on the wall to recess the cables.
Alternatively, cables can be threaded through the cable entry hole
on the mounting plate.
2. To prevent insects from entering the pendant mount, you may
block the cable entry hole with the supplied sponge in two different
ways. (See figures 1 and 2.)
3. Thread the cables through the mini pendant mount and affix the
pendant mount on the wall with screws and screw anchors (not
supplied).
4. Attach the waterproof collar to the mini pendant mount.
5. Thread the cables through the cap and affix it to the mini pendant
mount with the supplied screws and washers.
6. Connect the cables to the camera enclosure. Attach the camera
enclosure to the mount and affix it with the supplied bolt.
Note: After threading the cables, please block the cable entry hole with
the supplied sponges to prevent insects from entering the tube.
D-Link DCS-6815 User Manual

Mini Pendant Mount

Sponge
Figure 1
Sponge
Figure 2
13