Clarion CX501E Owner's Manual page 20

Bluetooth Operations
● TONE SEL
The system can ring if the mobile phone cannot
ring when the Bluetooth connection has been
established.
2-1. Press "TONE SEL".
3-1. Turn the [ROTARY] knob to select
"INTERNAL" or "AUTO".
∗ The unit setting is "AUTO".
"INTERNAL": Adjust tone in the car
Bluetooth system.
"AUTO": Automatic adjustment is enabled
in the paired mobile phone.
● NOISE
This option is used to set noise volume in the
car Bluetooth system.
2-1. Press "NOISE".
3-1. Turn the [ROTARY] knob to select "LOW"
or "HIGH".
∗ The factory default setting is "LOW".
● AUTO ANS
This is a setting to determine whether any
incoming call will be automatically or manually
answered.
∗ The factory default setting is "OFF".
2-1. Select "AUTO ANS".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
ON: Any incoming call is automatically
answered in 5 seconds.
OFF: User needs to manually answer the
call.
● AUTO CON
This function allows the Bluetooth to be
connected automatically with previously
connected device. Connection can be
established at any source mode.
∗ The factory default setting is "OFF".
2-1. Select "AUTO CON".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
ON: Automatic connection is enabled.
OFF: Automatic connection is disabled.
20
CX501E
● PASS KEY
This PASS KEY is used during pairing mode. A
maximum of 10 digits can be changed through
the car stereo.
∗ The factory default PASS KEY is "1234".
2-1. Select "PASS KEY".
3-1. Press the [ROTARY] knob.
4-1. Press the [x] or [v] button to remove
the cursor.
5-1. Turn the [ROTARY] knob to select the
desired digits.
6-1. Press and hold the [ROTARY] knob
(1 sec.) to store in memory.
● ADDRESS
This will hold the unique Bluetooth address. The
address is 16 figures.
2-1. Select "ADDRESS".
The Bluetooth address 8 figures appears in
the display.
3-1. Turn the [ROTARY] knob to display.
● Bluetooth Name
This will display the name of the Bluetooth.
2-1. Select "BT NAME".
The Bluetooth name appears in the display.
● Bluetooth Firmware version
This will display the firmware version of the
Bluetooth.
2-1. Select "BT FW".
The Bluetooth firmware version appears in
the display.