Hw Setup - Toshiba P875 User Manual

At this point, the hotkeys do not work. They will function after you enter the
password.
2.
3.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.

HW Setup

This section explains how to use the TOSHIBA HW Setup program to
configure your computer, and provides information on settings for various
functions.
After you changed the settings of HWSetup, a dialog box may appear to
prompt you that the changes will take effect after the computer is restarted.
Make sure to restart your computer immediately to apply these changes.
Accessing HW Setup
To run the HW Setup program, click Start -> All Programs -> TOSHIBA ->
Tools & Utilities -> HWSetup.
HW Setup window
The HW Setup window contains a number of tabs (General, Password,
Display, Boot Setting, Keyboard, USB, LAN and SATA) to allow specific
functions of the computer to be configured.
In addition there are also three buttons : OK, Cancel and Apply.
OK
Cancel
Apply
Some options shown in grey are possible to confirm their status.
General
This window displays the BIOS/EC version and contains two buttons :
Default and About.
User's Manual
Enter the Password.
Press ENTER.
Accepts your changes and closes the HW Setup
window.
Closes the window without accepting your
changes.
Accepts all your changes without closing the HW
Setup window.
P870/P875
4-11