Toshiba P875 User Manual
Hide thumbs Also See for P875:
Table of Contents

Advertisement

Quick Links

User's Manual
P870/P875

Advertisement

Table of Contents
loading

Summary of Contents for Toshiba P875

  • Page 1 User's Manual P870/P875...
  • Page 2: Table Of Contents

    The Keyboard ..................3-2 Using the Fingerprint Sensor ............... 3-5 Optical disc drives ................3-12 TOSHIBA VIDEO PLAYER ..............3-22 TOSHIBA Blu-ray Disc Player ............3-25 3D Playback on an External 3D Device ..........3-27 Wireless communications ..............3-31 LAN ....................... 3-34 Optional devices ..................
  • Page 3 Chapter 4 Utilities & Advanced Usage Utilities and Applications ..............4-1 Special features ..................4-5 Using the TOSHIBA Sleep Utility ............4-7 TOSHIBA Password Utility ..............4-10 HW Setup ....................4-11 TOSHIBA PC Health Monitor .............. 4-16 Using the Hard Disk Drive (HDD) Protection ........4-17 TOSHIBA HDD Protection Properties ..........
  • Page 4 Intel Corporation. Windows, Microsoft and Windows logo are registered trademarks of Microsoft Corporation. Bluetooth is a trademark owned by its proprietor and used by TOSHIBA under license. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
  • Page 5: Fcc Information

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s External RGB monitor port, Universal Serial Bus (USB...
  • Page 6 EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected/implemented those options/cables have to provide assurance that the system (PC plus options/cables) still fulfils the required standards.
  • Page 7: Video Standard Notice

    Automotive Environments Aircraft Environments Any consequences resulting from the use of this product in working environments that are not approved are not the responsibility of TOSHIBA. The consequences of the use of this product in non-approved working environments may be: Interference with other devices or machines in the near surrounding area.
  • Page 8 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causng Equipment Regulations.
  • Page 9 The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007. TOSHIBA will meet all REACH requirements and is committed to provide our customers with information about the chemical substances in our products according to REACH regulation.
  • Page 10: Following Information Is Only For Turkey

    P870/P875 Following information is only for Turkey: Compliant with EEE Regulations: TOSHIBA meets all requirements of Turkish regulation 26891 “Restriction of the use of certain hazardous substances in electrical and electronic equipment”. The number of possible pixel failures of your display is defined according to ISO 9241-307 standards.
  • Page 11 P870/P875 TOSHIBA SAMSUNG STORAGE TECHNOLOGY KOREA CORPORATION 416, MEATAN-3 DONG, YEONGTONG-GU, SUWON CITY, GYEONGGI, 443-742, KOREA 3. Hitachi-LG Data Storage, Inc. DVD Super Multi Blu-ray™ Combo drive Blu-ray™ Writer drive Hitachi-LG Data Storage, Inc. 22-23,KAIGAN 3-CHOME, MINATO-KU,TOKYO,108-0022 JAPAN Precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.”...
  • Page 12 ENERGY STAR logo on the computer and the following information applies. TOSHIBA is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency. Your computer...
  • Page 13: Preface

    P870/P875 Preface Congratulations on your purchase of this computer. This powerful notebook computer provides excellent expansion capability, includes multimedia functionality, and is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
  • Page 14 P870/P875 Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions.
  • Page 15: General Precautions

    P870/P875 General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
  • Page 16 P870/P875 Stress injury Carefully read the Instruction Manual for Safety and Comfort. It contains information on the prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use. It also includes information on work space design, posture and lighting that can help reduce physical stress.
  • Page 17: Instruction Manual For Safety And Comfort

    P870/P875 Instruction Manual for Safety and Comfort All important information on the safe and proper use of this computer is described in the enclosed Instruction Manual for Safety and Comfort. Be sure to read it before using the computer. User's Manual...
  • Page 18: Chapter 1 Getting Started

    Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
  • Page 19: Getting Started

    TOSHIBA Media Controller TOSHIBA Media Controller Plug-in TOSHIBA PC Health Monitor TOSHIBA Recovery Media Creator TOSHIBA Remote Control Manager TOSHIBA Resolution+ Plug-in For Windows Media Player TOSHIBA Service Station TOSHIBA Sleep Utility TOSHIBA Supervisor Password Utility TOSHIBA Value Added Package...
  • Page 20: Connecting The Ac Adaptor

    DC power and reduces the voltage supplied to this computer. Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
  • Page 21 P870/P875 When you connect the AC adaptor to the computer, always follow the steps in the exact order as described in the User’s Manual. Connecting the power cable to a live electrical outlet should be the last step otherwise the adaptor DC output plug could hold an electrical charge and cause an electrical shock or minor bodily injury when touched.
  • Page 22: Opening The Display

    P870/P875 Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the right side of the computer. Figure 1-3 Connecting the DC output plug to the computer 1. DC IN 19V jack 2. DC output plug Plug the power cord into a live wall outlet - the DC IN/Battery indicator on the front of the computer should glow.
  • Page 23: Turning On The Power

    P870/P875 When opening or closing the display panel, place one hand on the palm rest to hold the computer in place and use the other hand to slowly open or close the display panel (Do not use excessive force when opening or closing the display panel).
  • Page 24: Turning Off The Power

    P870/P875 Turning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode. Shut Down Mode When you turn off the power in Shut Down Mode, no data will be saved and the computer will boot to the operating system's main screen the next time it is turned on.
  • Page 25 P870/P875 When the AC adaptor is connected, the computer will go into Sleep Mode according to the settings in the Power Options (to access it, Start -> Control Panel -> System and Security -> Power Options). To restore the operation of the computer from Sleep Mode, press and hold the power button or press any key on the keyboard for a short amount of time.
  • Page 26: Hibernation Mode

    P870/P875 Sleep Mode limitations Sleep Mode will not function under the following conditions: Power is turned back on immediately after shutting down. Memory circuits are exposed to static electricity or electrical noise. Hibernation Mode The Hibernation Mode feature saves the contents of memory to the Hard Disk Drive when the computer is turned off so that, the next time it is turned on, the previous state is restored.
  • Page 27: Restarting The Computer

    P870/P875 Click Choose what the power buttons do or Choose what closing the lid does. Enable the desired Hibernation Mode settings for When I press the power button and When I close the lid. Click the Save changes button. Data save in Hibernation Mode When you turn off the power in Hibernation Mode, the computer will take a moment to save the current data in memory to the Hard Disk Drive.
  • Page 28: Chapter 2 The Grand Tour

    P870/P875 Chapter 2 The Grand Tour This chapter identifies the various components of the computer - it is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, please refer to the Legal Footnotes section in Appendix C.
  • Page 29: Left Side

    P870/P875 Keep foreign metal objects, such as screws, staples and paper clips, out of the Memory media slot. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Infrared receiver win-...
  • Page 30 P870/P875 Figure 2-2 The left side of the computer 1. Security lock slot 4. Universal Serial Bus (USB 3.0) port 2. TV Tuner jack* 5. Universal Serial Bus (USB 3.0) port 3. LAN jack 6. Optical disc drive * Provided with some models.
  • Page 31: Right Side

    P870/P875 Please note that it is not possible to confirm the operation of all functions of all USB devices that are available. In view of this it may be noted that some functions associated with a specific device might not operate properly.
  • Page 32 P870/P875 Universal Serial Bus Two Universal Serial Bus ports, which comply to (USB 3.0) port the USB 3.0 standard, are provided on the right side of the computer. The USB 3.0 port is compliant with USB 3.0 standard and backward compatible with USB 2.0 devices.
  • Page 33: Back

    P870/P875 Back The following figure shows the computer’s back. Figure 2-4 The back of the computer 1. Battery pack Product appearance depends on the model you purchased. Battery pack The rechargeable lithium-ion battery pack provides power to the computer when the AC adaptor is not connected.
  • Page 34: Front With The Display Open

    P870/P875 Battery lock Slide the battery lock to release the battery pack ready for removal. Battery release latch Slide and hold this latch into its "Unlock" position in order to release the battery pack for removal. For more detailed information on removing the...
  • Page 35 11. Fingerprint Sensor* 4. Web Camera* 12. LCD Sensor switch (not shown) 5. Display screen 13. Touch Pad 6. TOSHIBA eco button* 14. Touch Pad control buttons 7. Power button 15. Touch Pad ON/OFF indicator 8. Display hinge * Provided with some models.
  • Page 36 You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add various video effects to your video or photograph.
  • Page 37 Hibernation Mode and shut down even if the Panel Power Off feature is disabled. TOSHIBA eco button Press this button to launch the TOSHIBA eco Utility. TOSHIBA eco Utility can be used only in ® Windows 7. The button glows green when eco mode is on.
  • Page 38: Remote Controller

    P870/P875 Touch Pad ON/OFF Double tap this indicator to enable/disable the indicator Touch Pad. It also shows the status of the Touch Pad: Enabled: off Disabled: glows white Touch Pad The Touch Pad located in the palm rest is used to control the movement of the on-screen pointer.
  • Page 39 P870/P875 Figure 2-7 Remote controller 1. Power 8. Red Button 14. Channel/Page 20. Pause Control 2. Start 9. Green Button 15. Arrows and OK 21.Stop 3. Teletext 10.Yellow Button 16. Mute 22. Volume Control 4. Recorded TV 11. Blue Button 17.
  • Page 40 P870/P875 Guide Opens the Television Program Guide to display available TV channels and programs to watch and record. Live TV A shortcut to the full screen view. It also takes you to the current point in a live TV program after pausing live TV.
  • Page 41: Using The Remote Controller

    P870/P875 Play Plays the selected media. FWD (Fast Forward) Moves the media (video, disc, music, and so on) forwards. REW (Rewind) Moves the media (video, disc, music, and so on) backwards. Using the Remote Controller Some computers include a remote control unit, which allows you to control some of your computer’s functions from a distant location.
  • Page 42 P870/P875 When the infrared receiver window or the infrared emission part of the Remote Controller is dirty. When other computers which use an infrared remote controller are used near to your computer. When a low battery condition is present. Installing/Replacing battery Be sure to install the provided battery before using the remote controller.
  • Page 43: Internal Hardware Components

    The processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start -> All Programs -> TOSHIBA -> Support & Recovery -> PC Diagnostic Tool.
  • Page 44 P870/P875 In this manual, the word "HDD" or "Hard disk drive" also refers to the SSD unless otherwise stated. SSD is a large-capacity storage media which uses Solid-State Memory in place of a magnetic disk of the hard disk. Under certain unusual conditions of prolonged non-use and/or exposure to high temperatures, the SSD may be vulnerable to data retention errors.
  • Page 45 P870/P875 For more information regarding Graphics Processing Unit (GPU), please refer to the Legal Footnotes section in Appendix C. Graphics Control ® Some NVIDIA graphics models may include NVIDIA Optimus™ technology feature. ® NVIDIA Optimus™ technology intelligently optimizes notebook performance by seamlessly switching between a discrete NVIDIA GPU for great graphics performance and an Intel integrated graphics chip for sustained battery life.
  • Page 46: Intel Display Power Saving Technology

    P870/P875 Intel ® Display Power Saving Technology Intel GPU model may include the Display Power Saving Technology feature that can save the computer's power consumption by optimizing picture contrast on the internal LCD. This feature can be used if the computer is:...
  • Page 47: Chapter 3 Operating Basics

    P870/P875 Chapter 3 Operating Basics This chapter describes the basic operations of your computer, highlights the precautions that should be taken when using it. Using the Touch Pad To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.
  • Page 48: The Keyboard

    P870/P875 The Keyboard The computer’s keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhanced keyboard functions can be performed on the computer. The number of keys available on your keyboard will depend on which country/region your computer is configured for, with keyboards being available for numerous languages.
  • Page 49: Hot Key Functions

    To cycle through the displayed options, hold down FN and press the hot key repeatedly. Release the FN key when the desired option is selected. For more information, please refer to the TOSHIBA Flash Cards Help file. User's Manual...
  • Page 50: Hot Keys

    P870/P875 To access this help, click Start -> All Programs -> TOSHIBA -> Tools & Utilities -> Flash Cards. In the Settings for Flash Cards window, click the Help button. Hot keys This section describes the associated functions of the hot keys.
  • Page 51: Using The Fingerprint Sensor

    P870/P875 FN Sticky key You can use the TOSHIBA Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and then press an "F Number" key. To start the TOSHIBA Accessibility utility, click Start -> All Programs ->...
  • Page 52: Points To Note About The Fingerprint Sensor

    P870/P875 Fingerprint cannot be used in models that do not have a fingerprint module installed. How to Swipe your Finger Using the following steps when swiping fingers for fingerprint registration or authentication will help to minimize authentication failures: Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swipe finger levelly towards you until the sensor surface becomes visible.
  • Page 53 P870/P875 Do not touch the sensor with a wet finger or any wet objects - keep the sensor surface dry and free from water vapor. Do not touch the sensor with a soiled or dirty finger as minute foreign particles of dust and dirt may scratch it.
  • Page 54: Fingerprint Utility Limitations

    TOSHIBA does not guarantee that the fingerprint utility technology will be completely secure or error-free, or that it will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software.
  • Page 55 Delete the fingerprint data for the currently logged in user Click Start -> All Programs -> TOSHIBA -> Tools & Utilities -> Fingerprint Utility, or double click the utility icon in the Taskbar. Swipe your finger across the fingerprint sensor.
  • Page 56: Windows Logon Via Fingerprint Authentication

    Authentication screen is displayed. This will switch the password input screen across to the keyboard-based one. You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the Fingerprint boot authentication and its extended function to allow fingerprints to be used to access the computer when it is turned on.
  • Page 57 How to Enable Fingerprint boot authentication and Single Sign-On feature It is necessary to first enroll your fingerprint with the TOSHIBA Fingerprint Utility prior to enabling and configuring the boot authentication and Single Sign-On feature. You should check that your fingerprint is enrolled before configuring the settings.
  • Page 58: Optical Disc Drives

    10. Click Close. 11. "Are you sure you want to quit?" is displayed. Click OK. It will be returned to the TOSHIBA Fingerprint Utility main menu. This modified configuration for fingerprint boot authentication and Single Sign-on feature becomes effective the next time the system is booted up.
  • Page 59 P870/P875 Use the DVD playback application to view DVD-Video discs. For precautions on writing to discs, refer to the Writing discs section. To load discs, follow the steps as detailed below: When the computer’s power is on, press the eject button to open the disc tray slightly.
  • Page 60: Removing Discs

    P870/P875 Lay the disc, label side up, in the disc tray. Figure 3-7 Inserting a disc 1. Laser lens When the disc tray is fully opened, the edge of the computer will cover the disc tray slightly. Therefore, you will need to turn the disc at an angle when you place it in the disc tray.
  • Page 61: Writable Discs

    Writable discs This section describes the types of writable discs. Check the specifications of your drive to see the types of discs it can write. Use TOSHIBA Disc Creator and Corel Digital Studio to write compact discs. CD-R discs can be written only once. The recorded data cannot be erased or changed.
  • Page 62: Important Message

    The TOSHIBA Disc Creator and Corel Digital Studio are provided as writing software with this computer. Corel Digital Studio can be used to write files in video format. TOSHIBA Disc Creator can be used to write data. You can use the DVD Super Multi drive or Blu-ray™ Combo drive to write data to either CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD +R DL, DVD+RW or DVD-RAM discs.
  • Page 63: Before Writing Or Rewriting

    Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. CD-R: TAIYO YUDEN CO., Ltd.
  • Page 64: When Writing Or Rewriting

    P870/P875 DVD-RW: DVD Specifications for Recordable Disc for Version 1.1 or version Victor Company of Japan, Ltd. (JVC) (for 2x, 4x and 6x speed media) MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2x, 4x and 6x speed media) DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media) DVD-RAM: (DVD Super Multi drive only) DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or...
  • Page 65: Toshiba Disc Creator

    Keep mobile phones and other wireless communication devices away from the computer. TOSHIBA Disc Creator Please be aware of the following limitations when you use the TOSHIBA Disc Creator: DVD Video cannot be created using TOSHIBA Disc Creator. DVD Audio cannot be created using TOSHIBA Disc Creator.
  • Page 66: Data Verification

    "Disc Backup" function of TOSHIBA Disc Creator. TOSHIBA Disc Creator cannot record in packet format. You might not be able to use the "Disc Backup" function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL or DVD+RW disc that was made with other software on a different optical media recorder.
  • Page 67: Using Corel Digital Studio For Toshiba

    Simplified steps for making a DVD-Video or a Blu-ray Disc™ movie from adding video source: Click Start -> All Programs -> Corel Digital Studio for TOSHIBA -> Corel Digital Studio for TOSHIBA to launch Corel Digital Studio. Insert a disc in optical disc drive.
  • Page 68: Toshiba Video Player

    TOSHIBA Blu-ray Disc Player software application. If you use an over-used rewritable disc, the full formatting might be locked. Please use a brand new disc. TOSHIBA VIDEO PLAYER Please be aware of the following limitations when you use the TOSHIBA VIDEO PLAYER: User's Manual 3-22...
  • Page 69: Notes On Use

    Do not lock the computer using the Windows logo ( ) + L keys when running the TOSHIBA VIDEO PLAYER. The TOSHIBA VIDEO PLAYER does not have a parental control function. In order to protect copyrights, the Windows Print Screen function is disabled when TOSHIBA VIDEO PLAYER is running.
  • Page 70 Display Devices & Audio TOSHIBA VIDEO PLAYER will only run when "Colors" is set to "True Color (32 bit)". Click Start -> Control Panel -> Appearance and Personalization -> Display -> Adjust resolution, click "Advanced settings", select "Monitor"...
  • Page 71: Toshiba Blu-Ray Disc Player

    TOSHIBA VIDEO PLAYER features and instructions are explained in details in TOSHIBA VIDEO PLAYER Manual. Use the following procedure to open TOSHIBA VIDEO PLAYER Manual. Press the F1 key when TOSHIBA VIDEO PLAYER is launched andclick the Help button. TOSHIBA Blu-ray Disc Player Please be aware of the following limitations when you use TOSHIBA Blu- ray Disc Player.
  • Page 72 When you purchase Blu-ray™ Video, make sure it matches your drive, otherwise it will not play properly. To playback video on an external display or TV using TOSHIBA Blu- ray Disc Player, use output devices like external displays or TV that have HDCP supported HDMI port.
  • Page 73: 3D Playback On An External 3D Device

    The 3D effect differs between individuals. Notes on 3D Playback for TOSHIBA VIDEO PLAYER TOSHIBA VIDEO PLAYER has 3D playback function, which can playback 3D video content, and 2D home video content (DVD or video file) in 3D using real-time 2Dto3D conversion.
  • Page 74 P870/P875 The “TOSHIBA VIDEO PLAYER” is set by default in the 2D format. By pressing the 2Dto3D conversion function button, you decide to activate the 2Dto3D conversion function and therefore decide to watch your 2D content in 3D. The “TOSHIBA VIDEO PLAYER” will not run the 2Dto3D conversion function automatically.
  • Page 75 The picture generated by 2Dto3D conversion function is not the same as a picture produced for 3D playback use. The 2Dto3D conversion function simply uses TOSHIBA's original algorithm to apply pseudo 3D effect to the 2D content. The Player is set by default in the 2D format. By pressing the 2Dto3D...
  • Page 76 P870/P875 Depending on the system environment, the player may automatically switch into 2D if you perform any of the following operations during 3D playback. Furthermore, you may experience some time lag when the switching occurs. - Opening windows or pop-ups such as [Right-Click Menu], [Settings Window], [File Select] or [Error Message].
  • Page 77: Wireless Communications

    P870/P875 Wireless communications The computer’s wireless communication function supports some wireless communication devices. Only some models are equipped with both Wireless LAN and Bluetooth functions. Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a microwave oven or in areas subject to radio interference or magnetic fields.
  • Page 78: Card Specifications

    TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Card Specifications...
  • Page 79: Bluetooth Wireless Technology

    P870/P875 for operation in the license-free 2.4GHz and 5GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment. Radio Frequency Band 5GHz (5150-5850 MHz) (Revision a and n) Band 2.4GHz (2400-2483.5 MHz) (Revision...
  • Page 80: Lan

    This Bluetooth Stack is based on the Bluetooth specification, depending on the model you purchased. However, TOSHIBA cannot confirm the compatibility between any computing products and/or other electronic devices that use Bluetooth, other than TOSHIBA notebook computers.
  • Page 81: Lan Cable Types

    P870/P875 LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. If you are using Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T), be sure to connect with a CAT5e cable or higher.
  • Page 82: Optional Devices

    External monitor HDMI device Other Security lock Optional TOSHIBA accessories Memory media slot The computer is equipped with a Memory media slot that can accommodate some kinds of memory media with various memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants.
  • Page 83: Memory Media

    P870/P875 Please note that not all memory media have been tested and verified to work correctly. Therefore, it is not possible to guarantee that all memory media will operate properly. The slot does not support Magic Gate functions. Figure 3-10 Examples of memory media...
  • Page 84: Media Care

    P870/P875 SDXC 64GB Memory media format New media cards are formatted according to specific standards. If you wish to reformat a media card, be sure to do so with a device that uses media cards. Formatting an memory media card Memory media cards are sold already formatted in conformity to specific standards.
  • Page 85: Inserting A Memory Media

    P870/P875 SD Card (SD memory card, SDHC memory card and SDXC memory card) Set the write-protect switch to the lock position, if you do not want to record data. Inserting a memory media The following instructions apply to all types of supported media devices. To...
  • Page 86: Additional Memory Module

    When installing or removing a memory module, you must ensure that you do not touch any other internal areas of the computer. Use only memory modules approved by TOSHIBA. Do not try to install or remove a memory module under the following conditions.
  • Page 87: Installing A Memory Module

    P870/P875 Installing a memory module To install a memory module, follow the steps as detailed below: Shut down the computer - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 1, Getting Started if required).
  • Page 88 P870/P875 Align the notch of the memory module with that of the memory slot and gently insert the module into the slot at about a 30 degree angle before holding it down until the latches on either side snap into place.
  • Page 89: Removing A Memory Module

    P870/P875 Seat the memory module cover in place and secure it with the screw. Take care to ensure that the memory module cover is firmly closed. Figure 3-14 Seating the memory module cover 1. Memory module cover 2. Screw Install the battery pack - refer to...
  • Page 90: Tv Tuner

    P870/P875 Grasp the module by its edges and remove it from the computer. If you use the computer for a long time, the memory modules and the circuits locating close to the memory modules will become hot. In this case, let them cool to room temperature before you replace them. Or you will get burnt if you touch any of them.
  • Page 91: Using The Tv Tuner

    P870/P875 Simultaneous reception and recording cannot be used when an external video device is connected and the above settings are made. Simultaneous reception and recording cannot be used when the set- top box is connected and the above settings are made.
  • Page 92: External Monitor

    P870/P875 Figure 3-16 Connecting the coaxial cable 1. TV Tuner jack 2. Coaxial cable When you have been using a descrambler to receive the programs on cable TV or satellite broadcasting, connect the set-top box and splitter to the coaxial cable.
  • Page 93: Hdmi Device

    P870/P875 the computer's power off, be sure to press the hot key again to switch to the internal display). Please refer to the The Keyboard section for further details on using hot keys to change the display setting. Do not disconnect the external monitor while in Sleep or Hibernation Mode.
  • Page 94: Settings For Display Video On Hdmi

    P870/P875 The computer is completely turned off. Do not do so when the computer is in Sleep Mode or Hibernation Mode. When you connect a television or external monitor to the HDMI port, the display output device is set to HDMI.
  • Page 95: Security Lock

    Using REGZA Link (PC Control) Toshiba notebooks with REGZA Link (PC Control) include a Toshiba utility dedicated to take advantage of its capabilities which can allow you to: Use the TV remote control to output the computer screen onto the TV screen.
  • Page 96: P870/P875

    You are able to add a number of options and accessories in order to make your computer even more powerful and convenient to use. For reference, the following list details some of the items that are available from your reseller or TOSHIBA dealer: Memory Kit 1 GB, 2 GB, 4GB or 8GB memory modules (DDR3-1333/1600) can easily be installed in the computer.
  • Page 97: Microphone Level

    P870/P875 Microphone Level Follow the steps below to change the microphone recording level. Right click on the speaker icon on the Taskbar, and select Recording devices from the sub menu. Select Microphone, and click Properties. On the Levels tab move the Microphone slider to increase or decrease the microphone volume level.
  • Page 98: Video Mode

    P870/P875 Power Management The audio controller in your computer can be turned off when the audio function is not used. To adjust the configuration of audio power management, click the Power Management button When audio power management is enabled, the circle button at the upper left of the Power Management is blue and convex.
  • Page 99: Heat Dispersal

    P870/P875 You can clean the display screen by spraying a small amount of glass cleaner onto a soft, clean cloth and then wiping the screen gently with the cloth. Never spray cleaner directly onto the computer or let liquid run into any part of it.
  • Page 100: Chapter 4 Utilities & Advanced Usage

    README.TXT file (if applicable). TOSHIBA PC Diag- The TOSHIBA PC Diagnostic Tool will display nostic Tool basic system configuration information and allow the functionality of some of the computer's built- in hardware devices to be tested.
  • Page 101 P870/P875 TOSHIBA Password The TOSHIBA Password utility allows you to set Utility a password in order to restrict access to the computer. HW Setup This utility allows you to customize your hardware settings according to the way you work with the computer and the peripherals you use.
  • Page 102 You can track power savings by using eco mode continuously. To access this utility, click Start -> All Programs -> TOSHIBA -> Tools & Utilities -> eco Utility. TOSHIBA Disc Crea- You can create CDs and DVDs in a number of...
  • Page 103 To access this utility, click Start -> All Programs -> TOSHIBA -> Support & Recovery -> Service Station. TOSHIBA Sleep Utility This utility is able to either enable or disable the following functions: Sleep and Charge: By connecting to the...
  • Page 104: Special Features

    You may not have all the software listed above depending on the model you purchased. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures.
  • Page 105 This can be specified in the Power Options. TOSHIBA HDD Pro- This feature uses the acceleration sensor built in tection the computer to detect vibration and shocks, and...
  • Page 106: Using The Toshiba Sleep Utility

    Using the TOSHIBA Sleep Utility The TOSHIBA Sleep Utility is used for changing settings of the following function(s): Sleep and Charge Sleep and Music It also displays the remaining battery capacity.
  • Page 107: Sleep And Music

    P870/P875 When Sleep and Charge function is enabled, USB bus power (DC5V) will be supplied to compatible ports even when the power of the computer is turned OFF. USB bus power (DC5V) is similarly supplied to the external devices which are connected to the compatible ports.
  • Page 108: Starting The Toshiba Sleep Utility

    Sound quality may also be different. Use the Sleep and Music function with the display open. Starting the TOSHIBA Sleep Utility To start the utility, click Start -> All Programs -> TOSHIBA -> Tools & Utilities -> Sleep Utility. Enabling Sleep and Charge This utility can be used to enable and disable the Sleep and Charge function.
  • Page 109: Toshiba Password Utility

    Windows password. User Password To start the utility, point to or click the following items: Start -> All Programs -> TOSHIBA -> Support & Recovery -> TOSHIBA Assist -> SECURE -> User password please refer to the User Password section for further information.
  • Page 110: Hw Setup

    Make sure to restart your computer immediately to apply these changes. Accessing HW Setup To run the HW Setup program, click Start -> All Programs -> TOSHIBA -> Tools & Utilities -> HWSetup. HW Setup window...
  • Page 111 P870/P875 Default Return all HW Setup values to the factory settings. About Display the HW Setup version. Setup This field displays the installed BIOS version, date and EC version. Password This option allows you to set or reset the user password for power on.
  • Page 112: Boot Setting

    To change the boot drive, follow the steps below. Hold down F12 and boot the computer. when the TOSHIBA Leading Innovation >>> logo screen appears, release the F12 key. Use the up and down cursor keys to select the boot device you want and press ENTER.
  • Page 113 P870/P875 Boot speed This feature allows you to select system boot-up speed. Fast Reduces system boot-up time. System can boot only from the built-in HDD and only internal LCD and keyboard are supported during the boot process. Normal System boots up at normal speed. (Default) Panel Open - Power On This feature allows you to change the Panel Open - Power On setting.
  • Page 114 P870/P875 Disabled Disables the Wake-up on Keyboard function. (Default) Legacy USB Support Use this option to enable or disable USB Legacy Emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard by setting the Legacy USB Support item to enabled.
  • Page 115: Toshiba Pc Health Monitor

    This information is used to identify and provide a notification of system conditions which may effect the performance of your TOSHIBA computer. It may also be used to help diagnose problems should the computer require service by TOSHIBA or TOSHIBA's authorized service providers.
  • Page 116: Using The Hard Disk Drive (Hdd) Protection

    P870/P875 Once enabled, you may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via Uninstall a program in the Control Panel. Doing so will automatically delete all collected information from the HDD. The TOSHIBA PC Health Monitor software does not extend or modify TOSHIBA's obligations under its standard limited warranty in any way.
  • Page 117: Toshiba Hdd Protection Properties

    You can change the TOSHIBA HDD Protection settings by using the TOSHIBA HDD Protection Properties window. To open the window, click Start -> All Programs -> TOSHIBA -> Tools & Utilities -> HDD Protection. The window can also be started from the icon on the Taskbar or from the Control Panel.
  • Page 118: System Recovery

    Intensely shaking the computer or other subjecting it to strong impacts may cause damage to the computer. Details To open the Details window, click the Setup Detail button in the TOSHIBA HDD Protection Properties window. Detection Level Amplification When the AC adaptor is disconnected or the lid is closed, HDD Detection assumes that the computer will be carried and sets the detection level to the maximum for 10 seconds.
  • Page 119: System Recovery Options

    P870/P875 You can also create recovery media and restore the system. The following items will be described in this section: System Recovery Options Creating Recovery Media Restoring the pre-installed software from your created Recovery Media Restoring the pre-installed software from the Recovery Hard Disk...
  • Page 120 P870/P875 Do not use utilities, including those intended to enhance Hard Disk Drive access speed. They may cause unstable operation and damage data. Do not shut down/log off or Sleep/Hibernate while writing or rewriting the media. Set the computer on a level surface and avoid places subjected to vibrations such as airplanes, trains, or cars.
  • Page 121: Recovery Hard Disk Drive

    When drivers/utilities are installed, you can setup the respective drivers/ utilities from the following place. To open the setup files, Click Start -> All Programs -> TOSHIBA -> Support & Recovery -> Applications and Drivers. If you have previously chosen to remove the recovery partition and are trying to create "Recovery Media", you will see the following message: "The...
  • Page 122: Ordering Recovery Discs From Toshiba

    Ordering Recovery Discs from TOSHIBA* You can order Product Recovery discs for your notebook from the TOSHIBA Europe Backup Media Online Shop. * Please note that this service is not free-of-charge. Visit https://backupmedia.toshiba.eu on the Internet. Follow the on-screen instructions. You will receive your Recovery Discs within two weeks after placing your order.
  • Page 123: Chapter 5 Power And Power-Up Modes

    P870/P875 Chapter 5 Power and Power-Up Modes The computer's power resources include the AC adaptor, battery pack and any internal batteries. This chapter provides details on making the most effective use of these resources, and includes information on charging batteries, tips for saving battery power, and information on the different power-up modes.
  • Page 124: Monitoring Of Power Condition

    P870/P875 Monitoring of power condition As shown in the below table, the DC IN/Battery and Power indicators on the system indicator panel alert you to the computer’s operating capability and battery charge status. DC IN/Battery indicator Check the DC IN/Battery indicator to determine the status of the battery pack and the power status with the AC adaptor connected.
  • Page 125: Battery

    P870/P875 Battery This section explains battery types, use, recharging methods and handling. Battery types The computer has different types of batteries. Battery pack When the AC adaptor is not connected, the computer's main power source is a removable lithium ion battery pack, also referred to in this manual as the main battery.
  • Page 126: Charging The Batteries

    TOSHIBA as replacements. The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed. Dispose of the battery as required by local ordinances or regulations.
  • Page 127: Charging Time

    P870/P875 Charging Time The following table shows the approximate time required to fully charge a discharged battery. Battery type Power off Power on Battery pack 3.0 hours 8.0 hours (48Wh, 6 cell) Battery pack 3.8 hours 8.5 hours (66Wh, 6 cell high...
  • Page 128: Monitoring Battery Capacity

    P870/P875 Monitoring battery capacity Remaining battery power can be monitored using the following methods. Clicking the battery icon on the Taskbar Via the Battery Status in the Windows Mobility Center window You should wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time.
  • Page 129: Extending Battery Life

    P870/P875 Batteries exhausted time When you turn off the power of your computer with batteries fully charged, the batteries will be exhausted within the following approximate period. Battery type Sleep Mode Shut Down Mode Battery pack 28 hours 13 days...
  • Page 130: Replacing The Battery Pack

    P870/P875 Replacing the battery pack Please be aware that the battery pack is classified as a consumable item. The operating life of the battery pack will gradually reduce through repeated charging and discharging, and will need to be replaced when it reaches the end of its operating life.
  • Page 131: Power-Up Modes

    P870/P875 Figure 5-2 Releasing the battery pack -2 1. Battery lock 3. Battery pack 2. Battery release latch Installing the battery pack To install a battery pack, follow the steps as detailed below: Do not touch the battery release latch while holding the computer or the battery pack might fall out due to the unintentional release of the battery release latch and cause injuries.
  • Page 132: Panel Power On/Off

    P870/P875 Hot keys You can use the FN + F3 hot key to enter Sleep Mode or FN + F4 to enter Hibernation Mode. Panel power on/off You can set up your computer so that power is turned off automatically when you close the display panel, and turned on again when you open it.
  • Page 133: Troubleshooting

    In reality many problems can be solved simply, but a few may require help from TOSHIBA Support - if you find you need to consult others, be prepared to describe the problem in as much detail as possible.
  • Page 134: Analyzing The Problem

    Always try to make detailed notes of your observations and keep them in a permanent error log - this will help you to describe your problems to TOSHIBA Support. In addition, if a problem recurs, the log you have made will help to identify the problem faster.
  • Page 135: If Something Goes Wrong

    Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer.
  • Page 136: Hardware And System Checklist

    If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact TOSHIBA Support. AC power If you have trouble turning on the computer with the AC adaptor connected you should check the status of the DC IN/Battery indicator.
  • Page 137 If the AC adaptor still does not power the computer, you should contact TOSHIBA Support. Battery If you suspect a problem with the battery, you should check the status of the DC IN/Battery indicator.
  • Page 138 However, if you do not believe the battery is at the end of its operating life, you should speak to TOSHIBA Support. Check whether the battery is hot or cold to the touch - if so, it will not charge properly and should be allowed to reach room temperature before you try again.
  • Page 139: Real Time Clock

    (remapping involves changing or reassigning the function of each key). If you are still unable to use the keyboard, you should contact TOSHIBA Support. Internal display panel Apparent computer's display panel problems may be related to the computer's setup and configuration - please refer to the...
  • Page 140: Hard Disk Drive

    - if so remove it and try to start the Drive computer again. If this has no effect, check the Boot Priority setting within the TOSHIBA HW Setup utility - please refer to the Boot Setting section in Chapter 4, Utilities &...
  • Page 141: Pointing Device

    If you are still unable to resolve the problem, contact TOSHIBA Support. Pointing device If you are using a USB mouse, you should also refer to both the mouse section in this chapter, and the documentation supplied with your mouse.
  • Page 142: Touch Pad

    Within the Mouse Properties window, click the Pointer Options tab. Set the pointer speed as required and click If you are still unable to resolve the problem, contact TOSHIBA Support. The reaction of Adjust the touch Sensitivity. Touch pad is either To access it, click Start ->...
  • Page 143: Usb Mouse

    If you are still unable to resolve the problem, contact TOSHIBA Support. USB device In addition to the information in this section, please also refer to the documentation supplied with your USB device.
  • Page 144 Sleep and Charge function may be disabled. Sleep and Charge Select the "Enable Sleep and Charge" check box function. in the TOSHIBA Sleep utility to enable this function. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply may be stopped for safety reasons.
  • Page 145 P870/P875 Problem Procedure The battery depletes If Sleep and Charge function is enabled, the quickly even when I computer's battery will discharge during turned OFF the hibernation or when the computer is turned off. power of the Connect the AC adaptor to the computer or disable computer.
  • Page 146 Basics for further information. Volume cannot be adjusted during Windows start up or shut down. If you are still unable to resolve the problem, contact TOSHIBA Support. External monitor Please also refer to Chapter 3, Operating Basics, and to the documentation supplied with your monitor for further information.
  • Page 147 Display error occurs Check that the cable connecting the external monitor to the computer is firmly attached. If you are still unable to resolve the problem, contact TOSHIBA Support. Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub.
  • Page 148: Toshiba Support

    TOSHIBA Support. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first.
  • Page 149 TOSHIBA technical support If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the location listed in the enclosed warranty booklet or visit www.toshiba-europe.com or www.toshiba.co.jp/worldwide on the Internet..
  • Page 150: Specifications

    P870/P875 Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Size 417.6 (w) x 272.5 (d) x 28.0/33.7 (h) millimeters (not including parts that extend beyond the main body). The physical dimensions may vary depending on the model you purchased.
  • Page 151: External Rgb Monitor Port Pin Assignment

    P870/P875 External RGB monitor port pin assignment Signal Name Description Red Video Signal Green Video Signal Blue Video Signal Reserved Reserved Ground Ground Ground Ground Power Supply Ground Reserved Reserved Data Signal HSYNC Horizontal Sync Signal VSYNC Vertical Sync Signal...
  • Page 152: Ac Power Cord And Connectors

    P870/P875 Appendix B AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following...
  • Page 153 P870/P875 6-15P (250V) or 5-15P (125V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia, Europe and China.
  • Page 154: Legal Footnotes

    P870/P875 Appendix C Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. Non-applicable Icons Certain computer chassis are designed to accommodate all possible configurations for an entire product series. Therefore, please be aware that your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the computer chassis.
  • Page 155: Battery Life

    P870/P875 conditions. Read additional restrictions in your product documentation. Contact TOSHIBA technical service and support, refer to TOSHIBA support section in Chapter 6, Troubleshooting for more information. 64-Bit Computing 64-bit processors are designed to take advantage of 32 and 64 bit computing.
  • Page 156: Wireless Lan

    P870/P875 achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power. After going through many charge and discharge cycles, the battery will lose its ability to perform at maximum capacity and will need to be replaced.
  • Page 157: Copy Protection

    P870/P875 Copy Protection Applicable copy protection standards included in certain media may prevent or limit recording or viewing of the media. User's Manual...
  • Page 158: Information For Wireless Devices

    The Wi-Fi CERTIFIED™ logo is a certification mark of the Wi-Fi Alliance Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: Bluetooth Specification Ver.
  • Page 159: Wireless Devices And Your Health

    Because Wireless products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless products is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
  • Page 160 P870/P875 Italy: For private use, a general authorization is required if WAS/ RLAN’s are used outside own premises. For public use, a general authorization is required. Luxembourg: Implemented General authorization required for network and service supply. Norway: Implemented This subsection does not apply for...
  • Page 161 P870/P875 Restrictions for Use of 5470-5725MHz Frequencies in Europe Italy: For private use, a general authorization is required if WAS/ RLAN’s are used outside own premises. Luxembourg: Implemented General authorization required for network and service supply Russian Limited e.i.r.p 100mW. Permitted to use...
  • Page 162 P870/P875 designed to provide reasonable protection against harmful interference in a residential installation. Refer to the FCC information section for the detailed information. Caution: Exposure to Radio Frequency Radiation The radiated output power of the Wireless device is far below the FCC radio frequency exposure limits.
  • Page 163: Important Notice

    If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations.
  • Page 164 P870/P875 : This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 4. About the JEITA 5GHz Wireless LAN supports W52/W53/W56 Channel. User's Manual...
  • Page 165 Equipment checklist 1-1 Battery pack External monitor replacing 5-8 problems 6-14 Bluetooth External RGB monitor 2-5 Bluetooth Stack for Windows by Toshiba 4-2 problems 6-16 Fingerprint Sensor Boot Priority 4-13 using 3-5 Function keys 3-2 Cleaning the computer 3-52 Cooling vents 2-5...
  • Page 166 P870/P875 Hard disk drive Memory card care 3-38 automatic power off 4-5 Memory HDD Protection 4-17 installing 3-41 removing 3-43 HDMI out port 2-5 Heat dispersal 3-53, 4-6 memory media card inserting 3-39 Hibernation Mode 1-9, 4-6 removing 3-39 Hot keys 4-5...
  • Page 167 Battery 6-5 Bluetooth 6-16 External monitor 6-14 Hardware and system TOSHIBA Assist 4-3 checklist 6-4 HDD 6-8 TOSHIBA Disc Creator 3-19 Internal display panel 6-7 Keyboard 6-7 TOSHIBA HDD/SSD Alert LAN 6-15 Utility 4-3 Memory Media Card 6-9 Optical Disc Drive 6-8...

This manual is also suitable for:

P870

Table of Contents