Candy GOFS series Instructions For Use Manual page 6

Spin speed indicator light
When you set a program, the maximum possible spin speed will be automatically shown by
the relevant indicator light.
Choosing a smaller spin speed by the appropriate button, the relevant indicator light will go on.
WASH STAGE indicator lights
= main wash
= rinse
= spin
Buttons indicator light
These light up when the relevant buttons are pressed.
If an option is selected that is not compatible with the selected programme then the light on
the button first flashes and then goes off.
10
H
PROGRAMME selector with "OFF" position
ROTATES IN BOTH DIRECTIONS.
WHEN THE PROGRAMME
SELECTOR IS TURNED A SPIN
L
INDICATOR LIGHTS WILL GO
ON.
N.B. TO SWITCH OFF THE
MACHINE,
PROGRAMME SELECTOR TO
THE OFF POSITION.
M
Press the "Start/Pause" button to start the selected cycle.
Once a programme is selected the programme selector remains stationary on the selected
programme till cycle ends.
Switch off the washing machine by turning the selector to "OFF".
Note:
The programme selector must be returned to the "OFF" position
at the end of each cycle or when starting a subsequent wash
cycle prior to the next programme being selected and started.
TURN THE
11
N