Early Ambush; Description; Using Early Ambush - Bosch D9000 Series Owner's Manual Supplement

D9000,G & GV2 Series | Owner's Manual Supplement
[ENTER] key. The second pass code must be different from the
first pass code.
The area is disarmed and ready for entry.
3.0

Early Ambush

3.1

Description

Early Ambush adds an extra step to the disarm process by requiring an
additional pass code to be entered to confirm the area is secure. The
second pass code can be same as the first or a different one, depending on
the configuration. The first entry disarms the area and the second entry
stops an automatic timer from sending a duress event. Configured this
feature according to the guidelines specified in the D9412GV2/D7412GV2
Program Entry Guide (P/N: F01U003636).
3.2

Using Early Ambush

1. Ensure the keypad shows idle armed text.
2. Enter a valid pass code with the authority to Passcode Disarm by
pressing the [passcode digits] followed by the [ENTER] key.
3. Ensure the keypad shows idle disarmed text.
4. The user can now search the area; however, the user must return
before the preset Early Ambush Time expires.
5. Enter a second valid pass code with the authority to Passcode
Disarm by pressing the [passcode digits] followed by the
[ENTER] key.
6. The keypad shows confirmation that the second passcode was
accepted and that the Early Ambush Window was canceled by
showing CODE 2 VALIDATED.
The area is disarmed and ready for entry.
4
I have this feature.
I do not have this feature.
Bosch Security Systems | 5/05 | 33267F