Table of Contents
Advertisement
Available languages
Available languages
Review this table tofinddo-it-yourself
solutions forminor performance
problems.
Any other
service needed should b eperformed bya Sears orother qualified service agent.
_WARNING
Always
turn off and unplug vacuum cleaner before
performing
maintenance
to the
vacuum
cleaner.
Foliate
to do so could
result
in electrical
shock or personal
injury.
Vacuumcleanerwon't start.
1. Unplugged a twall outlet.
2, Tripped circuit b reaker/blown fuse
at household service panel.
3. Loose hose electrical connections.
Poor j ob of dirt
1. Full o r clogged dustbag.
pick=up.
2. Clogged airflowpassages.
3. Dirtyfilters.
4, Wrong pileheightsetting.
5. Suction c ontrol i s open,
6. Holein hose.
Z WornPowerMate a gitator.
8. Wornor broken belt.
9. Dirtyagitatoror end caps.
10. Canister hood open.
Vacuumcleanerstartsbut
1. Hose or hoodelectrical connections.
shutsoff.
2. Tripped overload protector i n
PowerMate.
3. Tripped thermal protector
incanister.
PowerMate will not
1. PowerMate connections
runwhen attached,
unplugged,
2. Wornor broken belt.
3. Dirtyagitatoror endcaps.
4. Trippedoverload protector i n
PowerMate.
5. Switch notinCARPET position.
Vacuumcleanerpicksup
1. Wrong pileheightsetting.
moveablerugs-or.
2. Suction t oostrong.
PowerMate pushes too hard.
Lightwon'twork.
t. Burned o utlightbulb.
2. Tripped overload protector i n
PowerMate.
Cordwon't rewind.
1. Dirtypowercord.
2. Cordjammed.
Vacuumcleanerleaves marks I. Wrong vacuuming pattern.
on carpet.
1. Plug infirmly, p ush ON/OFF switch to ON.
2, Reset circuit b reaker o r replace fuse,
3. Reconnect hose ends.
1. Change b ag.
2. Clear a irflowpassages.
3. Change f ilters.
4, Adjust s etting,
5. Adjust c ontrol.
6. Replace h ose.
Z Change a gitator.
8& 9. See BELT C HANGING ANDAGITATOR
CLEANING.
10. Close andlatchhood.
1. Check connections,
reconnect
hose ends.
2. Remove anyitems thatmaybecaught
orjammed, thenreset.If vacuum cleaner s tarts
andstops again, c leanagitatorandendcaps,
thenreset.
Reset thermal p rotector,
1.
2&3.
4,
Plugin firmly.
See BELT C HANGING ANDAGITATOR
CLEANING.
Remove anyitems thatmaybecaught
orjammed, thenreset.If vacuum cleaner s tarts
andstops again, c leanagitatorandendcaps.
thenreset.
Move switch to CARPET position.
5.
1.Adjust s etting.
2. Opensuction control.
t. Change l ightbulb.
2. Remove anyitems thatmaybecaught
or ammed, thenreset.If vacuum cleaner s tarts
andstops again, c eanagitatorandendcaps,
thenreset.
1. Clean thepower c ord.
2. Pull o utcordandrewind.
I. See VACUUMING TIPS.
= 20 =
Advertisement
Table of Contents
