Kenmore 911.49042 Use & Care Manual page 25

OPERATION
Setting Special Features (cont.)
This special feature will allow you to
change the speed: #1 means speed
of change is slow, up to #5 which
means speed of change is fast. To
set the speed you prefer, follow
these steps:
1. Touch and hold, at the same
time, the BAKE and BROIL pads
for 3 seconds, until the display
shows "SF."
2. Touch any UP arrow pad. The
display will show the current set
speed.
3. Touch any UP arrow pad to
increase the speed up to the
number 5.
4.
or
Touch any DOWN arrow pad to
decrease the speed down to the
number 1.
Touch the START pad.
When using convection bake, the
Convection Conversion feature will
automatically convert entered regular
baking temperatures to convection
baking temperatures.
Once the feature is activated,
the display will show the actual
converted (reduced) temperature.
For example, if you enter a regular
recipe temperature of 350°F and
press the START pad, the display
will show "CON" and the converted
temperature of 325°R
NOTE: This feature does not convert
convection bake cooking times, only
temperatures. This feature does not
convert convection roast cooking
times or temperatures.
1. Touch the BAKE and BROIL pads
at the same time for 3 seconds,
until the display shows "SF."
2. Touch the CONVECTION SELECT
pad. The display will show "CON
ON." If the display shows "CON
OFF," touch the CONVECTION
SELECT pad again and the
display will show "CON ON."
3. Touch the START pad.
To deactivate the feature, repeat
steps 1-3 above but touch the
START pad when "CON OFF"
is in the display.
25
20P309-3 ENv02 2/14/03, 2:50 PM