Parts And Features - Sears Kenmore Vacuum Cleaner Owner's Manual

WARNING
Electrical Shock Hazard
Do not plug into the electrical sup-
ply until the assembly is complete.
Failure to do so could result in elec-
tricat shock or injury,
HANDLE ASSEMBLY
Before assemblingyour vacuum cleaner, be
sure you have all the parts as shown in
PARTS AND FEATURES.
Remove the screw located just below the
top edge of the back of the vacuum.
Position the handle as shown in the illustra-
tion below,
While holding the power cord out of the way,
slide the handle into the opening at the top
of the vacuum,
Handle
Handle
Screw
Hole
Insert the screw so it passes through the
handle into the vacuum.
Begin to tighten the screw with"your fingers.
It may be necessary to adjust the handle
slightly_