Kenmore 141.16671 Operator's Manual page 9

Install Caster Seats
[] Install the Caster Seats (LF/RR and RF/LR) to Left and Right Cart Side Panels using 4
Phillips Head Screws 1/4" x 1/2" and 8 Phillips Head Screws 3/16" x 3/8".
Phillips Head Screw 1/4"xl/2"
Qty. 4
Part # $1!2G04081
Phillips Head Screw 3/16"x3/8"
Qty. 8
Part # $1!2G03061
-.....
H Install
Cart Side Panels to Cart Bottom Shelf
[] Install Cart Bottom Shelf to Caster Seats using 8 Phillips Head Screws 1/4"
x 1t2" and 4 Phillips Head Screws 3/16" x 3/8". Do not fully tighten at this time;Tighten
securely only after Rear Panel and Lower Door Brackets are attached,
(NOTE: Be sure that the tank hole is positioned to the right).
[] install the Door Guide Plate to Cart Bottom Shelf using 2 Phillips Head Screws 3/16" x
3/8".
Phillips Head Screw 1/4"xl/2"
Qty. 8
Part # $1!2G04081
Phillips Head Screw 3/16"x3/8"
Qty. 6
Part # $112G03061