Installing A Floppy Drive - Dell Dimension 5100C Service Manual

6. Disconnect the interface cable from the system board.
NOTE: The interface cable is held in place by the metal drive bracket and does not need to be removed from the drive.

Installing a Floppy Drive

NOTE: If the replacement or new floppy drive does not have the shoulder screws, use the screws in the drive-panel insert.
1. Follow the procedures in "Before You
2. Remove the computer cover.
3. Slide the drive into place until you feel a click or feel the drive securely installed.
4. Attach the interface cable to the system board.
Begin."