System Board Connectors - Dell PowerEdge 1600SC Systems Istallation And Troubleshooting Manual

Table A-1. System Board Jumper Settings
Jumper Setting
J11 pins 1 and
2
(default)
J11 pins 3 and
4
(default)
jumpered unjumpered

System Board Connectors

See Figure A-3 and Table A-2 for the location and description of system board connectors.
Figure A-3. System Board Connectors
Description
The password feature is enabled.
The password feature is disabled.
The configuration settings in NVRAM are retained at system boot.
The configuration settings in NVRAM are cleared at next system boot (see
"Troubleshooting Your System").
"Resetting Corrupted BIOS
Figure A-3 also indicates expansion slots and bus operating speeds.
Configuration" in