Dell Inspiron 1764 Service Manual page 6

1. Ensure that the work surface is flat and clean to prevent the computer cover from being scratched.
2. Turn off your computer (see
CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.
3. Disconnect all telephone or network cables from the computer.
4. Eject the card from the 7-in-1 memory card reader, if applicable.
5. Disconnect your computer and all attached devices from their electrical outlets.
6. Disconnect all attached devices from your computer.
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
7. Remove the battery (see Removing the
8. Open the computer and press the power button to ground the system board.
Back to Contents Page
Turning Off Your Computer) and all attached devices.
Battery).
Removing the Battery) before working inside the