Table of Contents
Advertisement
Displays the amount of processor Level 2 cache
L2 Cache
Displays the amount of processor Level 3 cache
L3 Cache
Indicates the amount of installed memory
Installed Memory
Indicates the frequency of installed memory
Memory Speed
Indicates the type of installed memory
Memory Technology
Displays the SATA drives connected to the SATA 0 connector
SATA 0
Displays the SATA drives connected to the SATA 1 connector
SATA 1
Displays the SATA drives connected to the SATA 2 connector
SATA 2
Displays the SATA drives connected to the SATA 3 connector
SATA 3
Displays keyboard errors when set to Report. Default is Report
Keyboard Errors
Advanced Settings
Allows you to enable or disable the following functions:
CPU Information
l
l
l
Allows you to set the mode of operation of the following devices on the system board:
Onboard Device
l
l
l
l
l
l
l
l
l
l
l
l
Allows you to configure the following:
Sata Configuration
l
l
l
l
l
Provides the following options:
BIOS Events
l
l
l
l
Allows you to configure the following:
System Management
l
l
Allows you to permanently activate or disable the Computrace® service from the computer.
Computrace
Security
Indicates if the System Setup is locked or unlocked
Unlock Setup Status
Displays the status of the administrator password
Admin Password
Displays the status of the system password
System Password
Allows you to enable the system password to be changed with or without providing the admin password.
Password Lock
l
l
Allows you to configure your computer's chassis intrusion switch:
Chassis Intrusion
l
l
l
Enables or disables the No Execute Memory Protection Technology.
No Execute
l
Virtualization (enabled by default)
Cool & Quiet (enabled by default)
C1E (enabled by default)
GFX/Display Port
x6 — GFX with x16
¡
x8+Display Port (default) — integrated video card
¡
Surround View — Enable ; Disable (default)
Integrated Audio — Auto; Off; On (default)
Integrated NIC — Off; On (default); On w/PXE; On w/RPL
Video Memory Size — Auto (default); 32 MB; 64 MB; 128 MB; 256 MB; 512 MB
Serial Port #1 — Off; 3F8/IRQ4 (default); 3E8/IRQ4; 2E8/IRQ3
LPT Port Mode — AT; PS/2 (default); EPP; ECP
LPT Port Address — 378h (default); 278h; 3BCh
USB controller — On (default); Off; No boot
Front Dual USB — On (default); Off
Rear Dual USB — On (default); Off
Rear Quad USB — On (default); Off
SATA Operation — IDE; RAID; AHCI (default)
HDD Acoustic Mode — Performance; Suggested; Quiet; Bypass (default)
SATA 0, SATA 1, SATA 2, and SATA 3 — Disable; Enable (default)
External SATA — Disable; Enable (default)
SMART Reporting — Disable; Enable (default)
View Event Log
Mark all events as read
Clear Event Log
Event Log Statistics
DASH/ASF Configuration — Disable (default); Alert Only; DASH/ASF
Text Console Redirection — Enabled; Disabled (default)
Lock (default) — You must provide the admin password to change the system password
Unlock — You can change the system password without providing the admin password.
On (default) — Enable chassis intrusion detection and report intrusion at power-on self test (POST)
Off — Disable chassis intrusion detection
On-Silent — Enable chassis intrusion detection, do not display any detected intrusions.
On (default)
Advertisement
Table of Contents
