Removing The Heat Sink And Processor - Dell OptiPlex 580 - Small Form Factor Service Manual

Back to Contents Page
Heat Sink and Processor
Dell™ OptiPlex™ 580 Service Manual—Small Form Factor
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Heat Sink and Processor

1. Follow the procedures in Before Working Inside Your
2. Loosen the screws that secure the heat sink to the system board.
3. Rotate the heat sink toward the back of the computer and remove the heat sink from the computer.
Computer.