Hints For Timer Recording - Emerson EWD2203 Owner's Manual

H9410UD(EN).qx33 03.1.14 9:21 PM
4) Set the start time
First, press K or L for the hour.
Then, press B. Next, press K or L
for the minute. Then, press B. And
then, press K or L for AM or PM. Then, press B.
5) Set the end time
Follow the instructions of
"Set the start time" to set
the end time.
6) Set the channel number
Press K or L repeatedly for the
desired channel number. Then,
press B.
If you connected the DVD/VCR COMBINATION UNITS to
a cable box or satellite box as in "DVD/VCR TO TV
CONNECTION" on page 13, select the DVD/VCR to channel 3
or 4 the same channel as RF output channel of the DVD/VCR.
Then, select the channel you want to record with the cable box
or satellite box.
Leave the cable box or satellite box on for timer recording.
7) Set the tape speed
Press K or L repeatedly for the
desired tape speed. Then, press B.
5
To set another program, repeat step [4]. To
exit, press CLEAR/C.RESET.
6
Press T-SET to set the timer.
¡ The TIMER light on the DVD/VCR COMBINA-
TION UNITS comes on. TIMER RECORDING
WILL NOT BE ACTIVATED UNLESS YOU
PRESS T-SET.
HINTS FOR TIMER
RECORDING
¡ If there is a power failure or the VCR is unplugged
for more than 30 seconds, the clock setting and all
timer settings will be lost.
¡
If a tape ends during TIMER RECORDING, the
VCR will stop, eject the tape, and switch to the DVD
mode automatically as the TIMER light blinks. (If
the DVD power is off, the VCR will become
STANDBY status).
¡ If a tape is not in the VCR or does not have a safe-
ty tab, the TIMER light flashes and timer recording
will not operate. Please insert a recordable tape.
¡
When all timer recordings are finished, the TIMER
light will flash. To use the VCR again as usual, press
T-SET to disable the flashing TIMER light, then
press VCR/TV to select the VCR position. Select
either VCR or DVD mode, then continue with the
other features as described in this manual.
Page 20
¡ When timer recordings are set, the TIMER light will
ONE TIME PROGRAM
come on. To use the VCR as usual until the time for
PROGRAM NUMBER 4
DATE 05 /12 MON
the recording, press T-SET so that TIMER light dis-
START TIME - - : - - - -
END TIME - - : - - - -
appears. Press VCR/TV to choose the VCR position.
CHANNEL - -
REC SPEED - -
Select either VCR or DVD mode, then continue with
the other features as described in this manual.
If you want to use the DVD player during
ONE TIME PROGRAM
a VCR timer recording or while the
PROGRAM NUMBER 4
DATE 05 /12 MON
TIMER light is on or flashes.
START TIME 07: 30 PM
END TIME - - : - - - -
¡ You can use the DVD player while the TIMER light
CHANNEL - -
REC SPEED - -
is on or flashes, or during a timer recording. Press
POWER to turn on the DVD. Press DVD on the
remote control to choose DVD mode, then continue
ONE TIME PROGRAM
PROGRAM NUMBER 4
with the other DVD features as described in this
DATE 05 /12 MON
START TIME 07: 30 PM
manual. You don't have to set the TIMER off to use
END TIME 08: 30 PM
CHANNEL - -
REC SPEED - - the DVD only.
TO STOP AN AUTOMATIC TIMER PRO-
GRAM ALREADY STARTED
Press STOP/EJECT on the DVD /VCR COMBINA-
TION UNITS.
TO CHECK, CORRECT, OR CANCEL AN
AUTOMATIC TIMER PROGRAM
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE 05 /12 MON
1
Press T-SET.
START TIME 07: 30 PM
END TIME 08: 30 PM
¡ If the DVD output mode is selected, you have to
CHANNEL 16
REC SPEED SP
switch it to the VCR mode by pressing the VCR on
SP
SLP
the remote control or the OUTPUT on the VCR.
2
Select main menu by pressing MENU.
3
Select "TIMER PROGRAMMING" by press-
ing K or L. Then, press B.
4
Select the program number you want to
check by pressing K or L.
¡
The details of the selected program appears on the
TV screen.
¡ Go to the digit you want to change by pressing B or
s. Then, enter correct numbers by pressing o or p.
¡ You may cancel the entire program by pressing s
VCR
while the program number flashes.
5
Press CLEAR/C.RESET to exit.
6
Press T-SET to return to timer stand-by
mode.
– 20 – EN
1L25