Hints For Timer Recording - Emerson EWR20V4 Owner's Manual

Hints for timer recording

• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.
• If a disc is not on the tray, the DVD indicator on the front panel flashes and timer recording cannot be performed.
Please insert a recordable disc.
• If a tape with a record tab is not in the cassette compartment, the VCR indicator on the front panel flashes and timer
recording cannot be performed. Please insert a recordable tape.
• When all the timer recording is completed, the
press POWER button first, and then press PLAY B or OPEN/CLOSE A (or STOP/EJECT C A
• The timer recording is not performed in DVD and VCR at the same time. If you set two programmings with the same
channel and time both in DVD and VCR, the programming that has priority will be recorded.
• During timer recording or timer standby (
available.To make these operations available, cancel the timer recording or timer standby first (
• To cancel the timer standby mode, press POWER button.
The priority of overlapped settings
This unit records the programs according to priority if the timer programmings are overlapped.The timer programming
set previously has priority.
A timer recording of lower priority will be canceled, start from the middle, or stop on the way.
Check the overlapped timer programmings and change the priority if necessary.
A programming set previously has priority
When the starting time is same:
A program set previously (PROG.A) has priority.
ex.1
PROG. A
PROG. B
Actual
recording
When the recording time is partially overlapped:
PROG. A will start after PROG. B is complete to be recorded.
PROG. A
PROG. B
Actual
recording
When the recording time is entirely overlapped:
PROG. A will not be recorded.
PROG. A
PROG. B
Actual
recording
When the end time of the programming currently being recorded and the starting time
of the one to be recorded sequentially are same:
The first 20-90 seconds of the programming to be recorded sequentially will be cut off.
PROG. A
PROG. B
Actual
recording
36
Recording
Timer recording (cont'd)
indicator is on the front display), any operations on the unit will not be
PROG. A PROG. B
PROG. B PROG. A
PROG. B
PROG. A PROG. B
The first 20-90 seconds will be cut off.
indicator flashes.To play or eject the recorded disc (or the tape),
When some programming have been
made at the end time of the
programming currently being recorded:
A program set previously (PROG. B) has priority.
ex. 2
PROG. A
PROG. B
PROG. C
Actual
recording
)
button.
indicator disappears).
PROG. A PROG. B
Note:
After finishing the timer
recording in DVD, other
timer programmings
cannot be performed for
a while.