Repeat; Program - Emerson EWD2203 Owner's Manual

H9410UD(EN).qx33 03.1.14 9:21 PM

REPEAT

REPEAT are available only during playback.
REPEAT TITLE / CHAPTER
To activate the repeat function, press REPEAT
during playback.
¡ The repeat mode changes as described below every
time you press the button.
CHAPTER
(current chapter repeat) (current title repeat)
Notes
¡
Repeat Title/Chapter is not available with some
scenes.
¡ The REPEAT setting will be cleared when moving
to other title or chapter.
REPEAT TRACK
To activate the repeat function, press REPEAT
during playback.
¡
The repeat mode changes as described below every
time you press the button.
TRACK
(current track repeat)
Notes
¡ Track repeat setting will be cleared when moving to
other track.
¡
Repeat playback does not function during A-B
REPEAT playback.
A-B REPEAT
1
Press A-B REPEAT at your chosen starting
point.
¡ A- appears briefly on the TV screen.
2
Press A-B REPEAT again at your chosen
end point.
¡
A-B appears briefly on the TV screen, and the
repeat sequence begins.
3
To exit the sequence, press REPEAT A-B.
Notes
¡
The A-B REPEAT section can only be set within the
current title (for DVDs), or current track (for audio
CDs).
¡ A-B REPEAT is not available with some scenes in
DVD.
¡ To cancel the A point which was set, press
CLEAR/C.RESET.
¡
A-B REPEAT playback does not function during
title, chapter, track or all repeat playback.
Page 25
DVD-V
TITLE OFF
(repeat off)
CD
ALL OFF
(repeat off)
(entire disc repeat)
DVD-V CD

PROGRAM

You may determine the order in which tracks will play.
1
In stop mode, press MODE.
¡
The PROGRAM screen will appear.
Press ▲ or ▼ to select a track, then press
2
ENTER.
¡
Press CLEAR/C.RESET
to erase the most recently
entered program.
3
Press PLAY to play the programmed tracks.
Notes
¡
While the program is being played back, the STOP
works as follows.
¡ Press STOP once and then PLAY again, playback
will restart from the point where STOP was pressed.
(Program continued)
¡
Press STOP twice and then PLAY again, playback
will restart from the track in the usual way. (Program
cleared)
¡ Up to 99 programs can be entered.
¡ If you like to repeat the current track in the program,
press REPEAT repeatedly until
during playback. If you like to repeat the entire pro-
gram press REPEAT repeatedly until
appears during playback.
– 25 –
CD
TRACK appears
ALL
EN
1L25