Removing The Front Bezel; Replacing The Front Bezel - Dell Studio XPS 8100 Service Manual

Back to Contents Page
Front Bezel
Dell™ Studio XPS™ 8100 Service Manual
Removing the Front Bezel
Replacing the Front Bezel
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
WARNING: Do not operate your computer with any cover(s) (including computer covers, front bezels, filler brackets, front-panel inserts, etc.)
removed.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
Removing the Front Bezel
1. Follow the procedures in Before You
2. Remove the computer cover (see
3. Place the computer in an upright position.
4. Grasp and release the front bezel tabs sequentially, one at a time by moving them outward from the front panel.
5. Rotate and pull the front bezel away from the front of the computer to release the front bezel clamps from the front panel slots.
1 front bezel 2 front panel slots (3)
3 front bezel tabs (4) 4 front panel
5 front bezel clamps (3)
6. Set aside the front bezel in a secure location.
Replacing the Front Bezel
Begin.
Removing the Computer Cover).