Canon Vixia HF R40 Instruction Manual page 74

- Wi-Fi networks with a stealth function that do not broadcast their network name (SSID)will
not be detected by the camcorder during the Wi-Fi network setup. Perform the setup manu-
ally (C[[] 140) or turn off the stealth function of the wireless router.
Wireless playback on a computer or similar device is not smooth.
- Playback may not besmooth depending on the wireless router's settings and capability.
- Connect the computer to the accesspoint using a LANcable.
- Remove any objects betweenthe camcorder and wireless access point that may interfere
with the wireless signal.
- Move the camcorder closer to the wireless accesspoint.
- Turn off the wireless functions of other wireless devices other thanthe computer or similar
device being usedfor playback.
- Switch the wireless access point to IEEE802.1 ln. Referto its instruction manualfor details.
- If these do not solvethe issue,the cause may be due the device or conditions unique to the
surrounding area.Use the supplied High Speed HDMIcable to connect the camcorder to a TV
(I]_ 105).
The wireless connection was interrupted while transferring files.
- Incomplete files may remain at the transfer destination. If incomplete files remain at the
transfer destination, check the contentand make sure they are safe to delete before deleting
them.
- Select [New Files] and perform the file transfer again.
Cannot connect a Wi-Fi-enabled external device wirelessty to the camcorder.
- Usethe _ _,} [Reset All] setting to reset the camcorder.The camcorder'sSSIDwill
return to the default setting and the passwordwill change. Delete the previousnetwork set-
tings from the external device and try to connect it to the camcorder.
List of Messages(inalphabetical order)
IIT'_'L_/I_'_'_I Refer to List of Messages for Connecting to an External
Hard Drive ([]]_] 170) for messages related to an external hard drive, List
of Messages for Wi-Fi Functions (E]_] 171) for a list of messages related
to general Wi-Fi functions, and List of Messages for Web Services
(1_1 173) for messages related to Web services when using Wi-Fi func-
tions.
Back up recordings regularly
- This message may appearwhen you turn on the camcorder. In the eventof a malfunction,
recordings may be lost so back up your recordings regularly.
I]T-_8_/I[I-'_ Built-in memory error
- The built-in memory could not be read.Contact a CanonServiceCenter.
164
* Addtona Information