Canon Vixia HF R40 Instruction Manual page 50

4 Touch [OK].
After the connection is established, continue using the function you
were previously using. For details, refer to Viewing and Changing FY/-F/
Settinds (CJ_ 142) or Sharin d Your Recordinds Usin d Web Services
(CJ_]133), as necessary.
Using the virtual keyboard
When you need to enter text for various settings, touch the text field
and a virtual keyboard will appear on the screen. The illustration
below explains the various keys you can use.
m
[] Switch between letters and numbers/special characters.
Change the position of the cursor
Delete the character to the cursor's left (backsDaceJ.
[] CaDs Lock. When the numencal Ke_board is displayed, [#%?]
switches between set 1 and set 2 of soecial characters.
Manual Setup
Perform this procedure to manually configure the wireless connection
settings. This may be necessary, for example, if your wireless router's
network name (SSID) cannot be detected due to the stealth function
being enabled. Manual setup is for advanced users of Wi-Fi networks.
To enter text for the various settings, use the virtual keyboard (C_ 140).
1 In the field for SSID, enter the SSID and then touch [Next].
2 In the authentication/encryption method area, touch [OPEN
NONE] and then touch the desired method.
If you selected [OPEN WEP], the WEP index is 1.
3 In the field for encryption key, enter the encryption key and then
touch [Next].
140 * Wi-F
Functons