Back to Removing and Replacing Parts
Coin-cell Battery
Dell™ Latitude™ E6410/E6410 ATG Service Manual
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Coin-cell Battery
NOTE:
You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in
Before Working Inside Your
2. Remove the
ATG Port Cover
3. Remove the battery.
4. Remove the
access
panel.
5. Disconnect the coin-cell battery cable from the system board.
6. Lift and remove the coin-cell battery out of its socket.
Replacing the Coin-cell Battery
To replace the coin-cell battery, perform the above steps in reverse order.
Back to Removing and Replacing Parts
Computer.
(applicable on E6410 ATG computer only).