Dell Vostro 1700 Service Manual page 4

Replacing the Audio Connector Board
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Connect the audio cable to the audio connector board.
2. Align the screw hole in the audio connector board with the screw hole in the base of the computer, and then lower the board into place.
3. Replace the M2.5 x 5-mm screw and secure the audio connector board to the base of the computer.
4. Replace the palm rest (see
5. Replace the internal card with Bluetooth wireless technology, if installed (see
6. Replace the display assembly (see
7. Replace the keyboard (see
8. Replace the hinge cover (see
9. Replace the hard drive (see
10. Replace the optical drive (see
Consumer Infrared (CIR) Board
Removing the CIR Board
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Follow the instructions in Before You
2. Remove the optical drive (see
3. Remove the hard drive (see
4. Remove the hinge cover (see
5. Remove the keyboard (see
6. Remove the display assembly (see
7. Remove the internal card with Bluetooth wireless technology, if installed (see
Replacing the Palm Rest).
Replacing the Display Assembly).
Replacing the Keyboard).
Replacing the Hinge Cover).
Replacing a Hard Drive).
Replacing the Optical Drive).
Begin.
Removing the Optical Drive).
Removing a Hard Drive).
Removing the Hinge Cover).
Removing the Keyboard).
Removing the Display Assembly).
Replacing the Bluetooth Card).
Removing the Bluetooth Card).